The Lantech IES-2008B-DNV is an 8-port 10/100BaseTX SNMP industrial Ethernet switch with Pro-Ring IIs self-recovery scheme in 20ms. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, IGMP snooping, query and source only for multicast IP surveillance, SSH/SSL* as well as Web Ping, CPU load monitoring, SNTP and SMTP** etc.
The Pro-Ring2se self-recovery scheme can recover Ring network in less than 20ms with single ring up to 50 switches with one step setup. Lantech IES-2008B-DNV builds all the important management features required in large network like DHCP Client/Server, 802.1X authentication, IGMP Query / Snooping and source only for reverse multicast flow, and advanced QoS. It also supports Ping commands via Web to detect whether a specific device is still connected for easy trouble-shooting.
The IES-2008B-DNV has the relay contact that is able to connect with alarm system and send Email and SNMP trap alert in case of power or port failure. It also has the built-in factory reset button and watchdog design can restore all setting back to factory default and automatically reboot the switch when CPU loading is find dead.
The IES-2008B-DNV is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. The Lantech IES-2008B-DNV meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive) in which vibration, high voltage, compass safe distance, salt mist tests, humidity etc are conducted to ensure the switch sustaining the harsh on-board environments often founded in Ships, Crafts and Offshore platforms.
The Lantech IES-2008B-DNV is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory and other factory assembly lines where needs reliable and robust network. It can be used in extreme environments with an operating temperature range of -40°C to 75°C.
IEEE Standards |
IEEE802.3 10Base-T Ethernet |
Switch Architecture |
Back-plane (Switching Fabric): 1.6Gbps |
Transfer Rate |
14,880pps for Ethernet port |
Packet Buffer |
1Mbits |
MAC Address |
8K MAC address table |
Flash ROM |
4Mbytes |
DRAM |
32Mbytes |
Connectors |
10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X function |
Network Cable |
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable |
Protocol |
CSMA/CD |
LED |
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green) |
Power Supply |
12V~48VDC(9V~56VDC);Dual power connector removable terminal block for master and slave power |
Overload current protection |
Present |
Operating Humidity |
5% ~ 95% (Non-condensing) |
Operating Temperature |
Wide Operating Temperature: |
Storage Temperature |
-40°C~85°C / -40°F~185°F |
Case Dimension |
IP-30, 74.5(W) x 105 (D) x 182 (H) mm |
Weight |
1000 g |
Fan Number |
0 |
Installation |
DIN Rail and Wall Mount** Design |
EMI & EMS |
FCC Class A, CE EN61000-6-2, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8, CE EN61000-4-11, CE EN55032 Class A, CE EN55024 |
Safety |
UL |
Stability Testing |
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) |
Power Consumption |
7 W at full load |
MTBF |
1,034,882 hours |
Warranty |
5 years |
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI |
SNMP MIB |
RFC 1215 Traps MIB, RFC 1213 MIBII, |
System Information |
Show detail info incl.Name , Version |
Pro-Ring 2se |
Pro-Ring 2se system Topologies for network recovery in less than 20ms up to 50 switches. Note:Pro-Ring2se is not compatible with Pro-Ring2s/Pro-RingII Pro-Ring I; 20ms recovery is on fiber port. |
DLR** (Device Level Ring) |
Followed Ethernet/IP standard for network recovery in less than 10ms up to 50 switches |
VLAN |
Port Based VLAN |
Port Trunk with LACP |
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
Spanning Tree |
Supports IEEE802.1d Spanning Tree, IEEE802.1w Rapid Spanning Tree |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service |
Class of Service |
Supports IEEE802.1p class of service, per port provides 4 priority queues |
Port Security |
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter |
Port Mirror |
Supports 3 mirroring types: "RX, TX and Both packet" |
IGMP & Static Multicast Forwarding |
Supports IGMP snooping v1,v2 |
IP Source Guard |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
Login Security |
Supports IEEE802.1X Authentication/RADIUS/Telnet |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Supports System log record and remote system log server |
SMTP** |
Supports SMTP** Server and 6 e-mail accounts for receiving event alert |
SNTP |
Supports SNTP to synchronize system clock to Internet |
Bandwidth Control & Storm Control |
Support ingress packet filter and egress packet limit |
Relay Alarm |
Provides one relay output for port breakdown, power fail alarm. |
SNMP Trap |
1. Cold start |
DHCP |
Provides DHCP Client/ DHCP Server/ Port and IP Binding |
DNS |
Provide DNS client feature and support Primary and Secondary DNS server. |
Firmware Update |
Supports TFTP/Web firmware update, TFTP backup and restore. White list for TFTP upgrade and configuration editable file |
Factory reset & Watchdog design |
Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch when CPU loading is too high |
ifAlias |
Each port allows importing 128bits of alphabetic string of word on SNMP and CLI interface |
P/N | Model name | Description |
---|---|---|
8350-233DNV | IES-2008B-DNV | 8 10/100TX Pro-Ring IIs Industrial Managed Ethernet Switch; -40°C to 75°C; DNV type approval |
Model name | Description |
---|---|
MDR-40 Series | 40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C) |
MDR-20 Series | 20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) |
2020 © Lantech Communications Global, Inc. ALL Rights Reserved. Privacy Policy | Terms of Service