8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo Industrial Managed Switch

  • ATEX Directive 94/9/EC certified (-ATEX model)
  • Pro-Ring2se for self-heal ring <20ms
  • Support Advanced SNMP including QoS, IGMP query & source only, DDM***, CPU load monitoring
  • Factory Default Button to restore setting
  • DNV Type Approved for Ships, Craft and Off-shore Platforms


Datasheet   Manual  


The Lantech IES-2208CA is an 8-port 10/100BaseTX + 2-port 10/100/1000T/Dual Speed SFP Combo industrial Ethernet switch with Pro-Ring2se self-recovery scheme in 20ms. The SFP connection is suitable with 100M or 1000M Dual Speed. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, IGMP snooping, query and source only for multicast IP surveillance, DDM*** as well as Web Ping, CPU load monitoring, SNTP and SMTP** etc.

The Pro-Ring2se self-recovery scheme can recover Ring network in less than 20ms with single ring up to 50 switches with one step setup. Lantech IES-2208CA builds all the important management features required in large network like DHCP Client/Server, 802.1X authentication, IGMP Query / Snooping, and advanced QoS. The exclusive source only function is good for reverse multicast flow which can automatically select the query (router port) in a ring for IP surveillance application. It also supports Ping commands via Web to detect whether a specific device is still connected for easy trouble-shooting.

The IES-2208CA has the relay contact that is able to connect with alarm system and send Email and SNMP trap alert in case of power or port failure. It also has the built-in factory reset button can restore all setting back to factory default.

The IES-2208CA is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. With ATEX Directive 94/9/EC approval, the IES-2208CA-ATEX can be implemented in hazardous or explosive condition without accelerating the damage. It’s the best choice for inflammable environment where the liquid, gas and vapor etc might present the hazardous condition which generally to be find in mining, oil & gas, chemical, processing automation areas. It’s also suitable for surveillance, factory automation, transportation, telecom / ISP outside terminal, heavy industrial factory and other factory assembly lines.

The -E / -ATEX / -DNV model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

The Lantech IES-2208CA-DNV meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive) in which vibration, high voltage, compass safe distance, salt mist tests, humidity etc are conducted to ensure the switch sustaining the harsh on-board environments often founded in Ships, Crafts and Offshore platforms.


  • Pro-Ring2se for self-recovery scheme in less than 20ms for single-ring with one setup
  • SFP slot supports 100/1000 Dual Mode with DDM*** for SFP diagnostic and monitoring
  • Back-plane (Switching Fabric): 5.6Gbps
  • 1Mbits Packet Buffer / 8K MAC address table
  • ATEX Directive 94/9/EC certified (-ATEX model)
  • IP30 metal housing with DIN rail and Wall-mount** design
  • Provides EFT protection ±2000 VDC for power line
  • Supports ±6000 VDC for ESD protection
  • Support CPU load monitoring and Web Ping to check if the connected device is alive
  • IEEE 802.1d Spanning Tree & IEEE 802.1w RSTP
  • IGMP with Snooping and Query mode for Multi Media Application
  • IGMP source only for reverse multicast application
  • Static Multicast Route for non-IGMP application
  • Port Based VLAN, 802.1Q Tag VLAN
  • Port Trunk with LACP
  • Supports IEEE 802.1ab LLDP
  • Supports IEEE 802.1p CoS, 4 priority queues per port
  • Port base, Tag Base and Type of Service Priority
  • Supports Ingress Packet Filter and Egress Rate Limit
  • Supports Broadcast/Multicast Packet Filter Control
  • Port Mirror: Monitor traffic in switched networks
    • TX, RX, Both of TX and RX Packet
  • System Log Server/Client
  • SMTP** e-mail Alert up to 6 emails
  • Security
    • Port Security: MAC address entries/Filter
    • IP Source Guard: IP address security management to prevent unauthorized intruder
    • Login Security: IEEE802.1X/RADIUS;SSH* / SSL*
  • SNMP Trap
    • Device cold start, Power status, Authentication failure, Port Link up/Link down
  • Relay Alarm Output System Events
  • TFTP & Web Firmware Update & System Configure Restore/Backup;
  • Factory reset bottom can restore all setting back to factory default
  • DNV Type Approved for Ships, Craft and Off-shore Platforms
*Future Release
***Optional DDM SFP required


Hardware Specifications

IEEE Standards

IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.3af Power over Ethernet
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1p Class of Service
IEEE802.1x User Authentication (Radius)
IEEE802.1ab LLDP

Switch Architecture

Back-plane (Switching Fabric): 5.6Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet / Gigabit Fiber port

Packet Buffer


MAC Address

8K MAC address table

Flash ROM





10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X function
10/100/1000T/SFP Combo port: 2 x RJ-45 + 2 x 100/1000 SFP socket with DDM
RS-232 connector: RJ-45 type

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
1000Base-T: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)

Optical Fiber

Multi mode: 0 to 550 m, 850 nm (50/125 μm); 0 to 2 km, 1310 nm (50/125 μm)
Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm (9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 nm (9/125 μm)
Multi mode: 0 to 2 km/ 5 km, 1310 nm (62.5/125 μm)
Single mode: 0 to 30 km, 1310 nm (62.5/125 μm)
WDM 1.25Gbps:
Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm); 0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)
WDM 125Mbps:
Single mode: 0 to 20 km/ 40 km/ 60 km/ 80 km, 1310 nm (9/125 μm); 0 to 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)




Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green)
8 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)
Combo port: SFP LNK/ACT(Green), 1000T: LNK/ACT(Green), 1000M(Yellow)

Power Supply

9.5V~60VDC;Redundant power connector removable terminal block for master and slave power

Overload current protection


Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

Standard: -20°C~60°C / -4°F~140°F
Wide Operating Temperature for -E model/ -ATEX model/ -DNV model:
-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Case Dimension

74(W) x 105 (D) x 152 (H) mm (non-DNV model)
74.5(W) x 105 (D) x 182 (H) mm (DNV model)


850 g (non-DNV model)
1000 g (DNV model)

Fan Number



DIN Rail and Wall Mount** Design


FCC Class A, CE EN61000-6-2, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8, CE EN61000-4-11, CE EN55032 Class A, CE EN55024


ATEX Directive 94/9/EC (-ATEX model)

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

Power Consumption

9.86 W at full load


1,221,554 hours


5 years

Software Specifications


SNMP v1 v2c, v3/ Web/Telnet/CLI


RFC 1215 Traps MIB, RFC 1213 MIBII,
RFC 1157 SNMP MIB, RFC 1493 Bridge MIB,
RFC 2674 VLAN MIB, RFC 1643 EtherLike,
RFC 1757 Rmon, RSTP MIB,

System Information

Show detail info incl.Name, Version
CPU load monitoring for every 1,5,15 minutes
Display network parameters incl. Mac, IP, Gateway, Netmask
Allow adding port description


Pro-Ring 2se system Topologies for network recovery in less than 20ms up to 50 switches.

Note:Pro-Ring2s is not compatible with Pro-Ring2s/Pro-RingII/Pro-Ring I; 20ms recovery is on fiber port.


Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)

Port Trunk with LACP

LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members


Supports LLDP to allow switch to advise its identification and capability on the LAN

Spanning Tree

Supports IEEE802.1d Spanning Tree, IEEE802.1w Rapid Spanning Tree

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service

Class of Service

Supports IEEE802.1p class of service, per port provides 4 priority queues

Port Security

Supports 100 entries of MAC address for static MAC and another 100 for MAC filter

Port Mirror

Supports 3 mirroring types: "RX, TX and Both packet"

IGMP & Static Multicast Forwarding

Supports IGMP snooping v1,v2 and Query
256 static multicast forwarding groups for non-IGMP cameras
IGMP source to auto learn multicast stream and forward the traffic only to multicast router ports

IP Source Guard

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS/Telnet

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server


Supports SMTP** Server and 6 e-mail accounts for receiving event alert


Supports SNTP to synchronize system clock to Internet

Bandwidth Control & Storm Control

Support ingress packet filter and egress packet limit
The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100), 100K~256000Kbps(1000)
Ingress filter packet type combination rules are
Broadcast/Multicast/Unknown Unicast packet,
Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100), 100K~256000Kbps(1000)

Relay Alarm

Provides one relay output for port breakdown, power fail alarm.
Alarm Relay current carry ability: 1A @ DC24V


1. Cold start
2. Link down
3. Link up
4. Authorization fail


Provides DHCP Client/ DHCP Server/ Port and IP Binding


Provide DNS client feature and support Primary and Secondary DNS server.

Firmware Update

Supports TFTP/Web firmware update, TFTP backup and restore. White list for TFTP upgrade and configuration editable file

Factory reset & Watchdog design

Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch when CPU loading is too high


Each port allows importing 128bits of alphabetic string of word on SNMP and CLI interface

*Future Release
***Optional DDM SFP required


Non-DNV model

DNV model


P/N Model name Description
8350-451 IES-2208CA 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo Industrial Managed Ethernet Switch; 9.5~60VDC; -20°C to 60°C
8350-452 IES-2208CA-E 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo Industrial Managed Ethernet Switch; 9.5~60VDC; -40°C to 75°C
8350-452-ATEX IES-2208CA-ATEX 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo Industrial Managed Ethernet Switch; 9.5~60VDC; -40°C to 75°C; ATEX Directive 94/9/EC
8350-452-DNV IES-2208CA-DNV 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo Industrial Managed Ethernet Switch; 9.5~60VDC; -40°C to 75°C; DNV Type Approval


Model name Description
MDR-40 Series 40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)
MDR-20 Series 20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)


Model name Description Model name Description
8330-162X MINI GBIC 1000SX (LC/0.5KM) Transceiver 8330-186 1.25Gbps BiDi SFP 20KM Transceiver (WDM 1310)
8330-163X MINI GBIC 1000SX2 (LC/2KM) Transceiver 8330-187 LTSFP-1000BX-20KM Transceiver (WDM 1550)
8330-165X MINI GBIC 1000LX (LC/10KM) Transceiver 8330-180 LTSFP-1000BX-40KM Transceiver (WDM 1310)
8340-0591 MINI GBIC 1000LHX (LC/40KM) Transceiver 8330-182 LTSFP-1000BX-40KM Transceiver (WDM 1550)
8330-166 MINI GBIC 1000XD (LC/50KM) Transceiver 8330-181 LTSFP-1000BX-60KM Transceiver (WDM 1310)
8330-169 MINI GBIC 1000XD (LC/60KM) Transceiver 8330-183 LTSFP-1000BX-60KM Transceiver (WDM 1550)
8330-167 MINI GBIC 1000ZX (LC/80KM) Transceiver 8330-184 LTSFP-1000BX-80KM Transceiver (WDM 1490)
8330-170 MINI GBIC 1000EZX (120KM) Transceiver 8330-185 LTSFP-1000BX-80KM Transceiver (WDM 1550)
8330-168 MINI GBIC 10/100/1000T (100m) Transceiver 8330-071 125Mbps BiDi SFP 2KM (WDM 1310) Transceiver
8330-060 100Base FX 2KM, Multi-mode, LC Transceiver 8330-072 125Mbps BiDi SFP 2KM (WDM 1550) Transceiver
8330-065 100Base FX 5KM, Multi-mode, LC Transceiver 8330-069 125Mbps BiDi SFP 20KM (WDM 1310) Transceiver
8330-061 100Base LX 30KM, Single-mode, LC Transceiver 8330-068 125Mbps BiDi SFP 20KM (WDM 1550) Transceiver
8330-059 100Base LX 60KM, Single-mode, LC Transceiver 8330-080 125Mbps BiDi SFP 40KM (WDM 1310) Transceiver
8330-197 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1310) 8330-082 125Mbps BiDi SFP 40KM (WDM 1550) Transceiver
8330-198 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1550) 8330-081 125Mbps BiDi SFP 60KM (WDM 1310) Transceiver
8330-195 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1310) 8330-083 125Mbps BiDi SFP 60KM (WDM 1550) Transceiver
8330-196 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1550) 8330-084 125Mbps BiDi SFP 80KM (WDM 1310) Transceiver
8330-188 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1310) 8330-085 125Mbps BiDi SFP 80KM (WDM 1550) Transceiver
8330-189 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1550) 8330-191 Dual Speed SFP 100M/1000M-LX 10KM Transceiver
    All SFP P/N# ended with D are with DDM function