Operating system for Lantech managed Ethernet switches

  • Command authorization
  • Secure Web GUI
  • Dual flash images
  • Multiple configuration files
  • Complete session logging
  • SNMPv1, v2c, and v3
  • Remote monitoring (RMON)
  • Inter-VLAN Routing
  • Router-on-a-stick
  • VRRP

Datasheet  

OVERVIEW

Lantech OS3/OS4 Layer3 Lite Platform is a data center-class operating system built with modularity, resiliency, and serviceability at its foundation. Based on the VLAN routing standard, Lantech OS3/OS4 Layer3 Lite Platform comes with a Web UI interface and a command-line interface (CLI) like that of Lantech’s previous platform. The self-healing design of Lantech OS3/OS4 Layer3 Lite Platform makes zero-impact operations a reality.


Focused on the requirements of the data center, Lantech OS3/OS4 Layer3 Lite Platform provides a robust and comprehensive features that fulfill the switching and storage networking needs of present communication networks. Lantech OS3/OS4 Layer3 Lite Platform offers reliability, innovation, and operational consistency. Lantech OS3/OS4 Layer3 Lite Platform is based on our OS3/OS4 platform and adds major features of OS Layer 3, it runs on the Lantech OS3/OS4-supported hardware-based network switches, which include Lantech L6000 and L5000 Series Switches.


*Future release
**Optional

FEATURES

  • Command authorization
    Leverages RADIUS to link a custom list of CLI commands to an individual network administrator’s login; an audit trail log activity
  • Secure Web GUI
    Provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
  • Dual flash images
    Provides independent primary and secondary operating system files for backup while upgrading
  • Multiple configuration files
    Stores easily to the flash image
  • Complete session logging
    Provides detailed information for problem identification and resolution
  • SNMPv1, v2c, and v3
    Facilitate centralized discovery, monitoring, and secure management of networking devices
  • Remote monitoring (RMON)
    Uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
  • Inter-VLAN Routing
    Route traffic between different VLAN by implementing a switch with routing function in the network.
  • Router-on-a-stick
    A type of routing configuration in which a single physical interface set as VLAN trunk port manages traffic between multiple VLANs from edge site.
  • VRRP
    Provides automatic assignment of available Internet Protocol (IP) routers to participating hosts and increases the availability and reliability of routing paths via automatic default gateway selections on an IP subnetwork.
*Future release
**Optional

SPECIFICATIONS

Management

SNMP v1 v2c, v3/ Web/Telnet/CLI

SNMP MIB

RFC 1215 Traps MIB**,
RFC 1213 MIBII
RFC 1158 MIBII
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB
RFC 1573 IF MIB
RFC 2674 VLAN MIB**, 
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB**;
LLDP MIB
RSTP MIB**
Private MIB

ITU G.8032

Support ITU G.8032 v2/2012 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode)
Support various ring/chain topologies
Includes train ring*, auto ring*, basic single ring, enhanced ring, multiple-VLAN ring*
Enhanced G.8032 ring configuration with ease
Cover multicast & data packets protection

PoE Management

  1. PoE Detection to check if PD is hang up then restart the PD
  2. PoE Scheduling to On/OFF PD upon routine time table

Per Port PoE Status

On/ Off, voltage, current, watts, temperature

User friendly UI

  1. Auto topology drawing
  2. Topology demo
  3. Auto configuration for G.8032(auto mode**) for single ring
  4. DDM threshold monitoring with dB values***
  5. Complete CLI for professional setting

Port Trunk with LACP

LACP Port Trunk: 8 Trunk groups

LLDP

Supports LLDP to allow switch to advise its identification and capability on the LAN

CDP

Cisco Discovery Protocol for topology mapping

Environmental Monitoring

System status for input voltage, current and ambient temperature to be shown in GUI and sent alerting if any abnormal status

VLAN

Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)
GVRP, QinQ, QoS QinQ**, Protocol based VLAN ; IPv4 Subnet based VLAN

IPv6/4

Present

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8/16* MSTI

Quality of Service

The quality of service determined by IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP

Class of Service

Support IEEE802.1p class of service, per port provides 8 priority queues

QoS by VLAN

Tagged QoS by VLAN for all devices in the network

Remote Admin

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS

Port Mirror

Support 3 mirroring types: “RX, TX and Both packet”

Network Security

Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
802.1X access control for port based and MAC based authentication/static MAC-Port binding
Ingress/Egress ACL L2/L3
SSL/ SSH for Management
HTTPS for secure access to the web interface
TACACS+ for Authentication

IGMP

Support IGMP snooping v1,v2,v3; Supports IGMP static route; 256 multicast groups; IGMP router port ; IGMP query; GMRP

Static multicast forwarding

Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application

Bandwidth Control

Support ingress packet filter and egress packet limit.
The egress rate control supports all of packet type.
Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet.
The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress packet limit.

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server

SMTP/Text SMS**

Supports SMTP Server and 8 e-mail accounts for receiving event alert; can send SMS** text alert via mobile

Protection

  1. Miss-wiring avoidance
  2. Node failure protection
  3. Loop protection

SNMP Trap

Up to 10 trap stations; trap types including:

  1. Device cold start
  2. Authorization failure
  3. Port link up/link down
  4. DI triggered
  5. Typology change(ITU ring)
  6. Power failure
  7. Environmental abnormal**

DHCP

Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based or VLAN based DHCP distribution (DHCP relay agent); DHCP Option 66; IPv6 address resolution for basic DHCP server

Mac based DHCP Server

Assign IP address by Mac that can include dumb switch in DHCP network

DNS

Provide DNS client feature and connect with Primary and Secondary DNS server.

SNTP

Supports SNTP to synchronize system clock in Internet

Firmware Update

Supports TFTP/SFTP** firmware update, TFTP backup and restore; HTTP firmware upgrade; LantechTM InstaView** for multiple upgrade

Configuration
upload and download

Supports text configuration file for system quick installation; Support factory reset button to restore all settings back to factory default; USB for auto restore/backup configuration file

Dual Image Firmware

Support dual image firmware function

IEC61375-2-5/L3**

Optional IEC61375-2-5/L3 upgradable

Inter-VLAN routing

Support dynamic routing and static routing

Router-on-a stick

Route traffic between different VLAN groups via VLAN trunking port.

VRRP

Combine Max. 2 gateways as single virtual gateway

*Future release
**Optional

PLATFORMS COMPARISON

 

OS4

OS3

OS2

OS1

2000 series

Management

SNMP v1 v2c v3

Web browser

Telnet

SSH

SNTP

LLDP

CDP

Topology View

Environment Monitoring

Redundancy

STP

RSTP

MSTP

Loop Protection

Proprietary redundant protocol

ITU-Ring Enhance mode

ITU-Ring Enhance mode

ITU-Ring Enhance mode

ITU-Ring Enhance mode

ProRing2se

MRP

Dual Homing

G.8032 standard

Security

MAC filter

IP Security (What IP can access switch)

Login Security (RADIUS)

SSL

Login Security (TACACS+)

ACL

Ingress only

Ingress only

Ingress Only

IEEE 802.1X

IP Source Guard*

ARP inspection*

BPDU Guard*

Remote admin (limitation of accessing way)

VLAN

Port Based VALN

Tagged VLAN

GVRP

QinQ 

Protocol Based

Subnet Based

Multicast

IGMP Snooping

MLD Snooping

IGMP router port

Static Multicast forwarding

GMRP

Traffic control

Rate Limiting

Link aggregation

Port based QoS

VLAN based QoS

CoS/DSCP

Port Monitoring

DHCP

IP v6 version(Basic)

IP v4 version

Port Based DHCP

MAC based DHCP

Option82 DHCP Relay

Option 12/42/66

option 66 only

option 66 only

DHCP Snooping

PXE application

PoE

Alive Detecting

PoE Scheduling

Event&Log

SysLog client&server

Email

SNMP Trap

V1/V2c

Relay

(By models)

Digital Input/Output

Triggered by event of environment

Triggered by event of SFP DDM

Diagnostic

Ping

ARP

DDM information

Maintainance

Firmware upgrading

WEB/TFTP/FTP

WEB/TFTP/FTP

WEB/TFTP/FTP

WEB/TFTP/FTP

WEB/TFTP

Configuration file import/export

WEB/TFTP/FTP

WEB/TFTP/FTP

WEB/TFTP/FTP

WEB/TFTP/FTP

WEB/TFTP

Auto Provision

Dual Image

*Future release
**Optional

ORDER INFORMATION

P/N Model name Description
9000-114 OS3 – L3L OS3 software platform with Layer 3 Lite functions
9000-110 OS4 – L3L OS4 software platform with Layer 3 Lite functions


AVAILABLE MODELS