16 10/100/1000T (w/8/16 PoE at/af) EN50155 OS3 Managed Ethernet Switch; 24VI/24TVI/WVI input


CE UKCA FCC WEEE RoHS2 EN45545-2  Fire & Smoke EN50155 PoE 802.3at/af 30W Wide power input range with isolation Environmental Monitoring IEC 61375-2-5 ETBN L3L - Layer3 Lite L3 - Layer3


Hardware Datasheet   Software Datasheet   Hardware Manual  
For latest firmware and web UI user manual, please contact us.

OVERVIEW

Lantech T(P)GS-L5016T is a high performance OS3 (All Gigabit) Ethernet switch with 16 10/100/1000T. PoE model has 8(16) PoE 802.3af/at ports which provides advanced security function for network aggregation deployment.


Up to 8/16 PoE at/af ports w/advanced PoE management and PoE galvanic isolation; Ethernet power input galvanic isolation
Compliant with 802.3af/at standard, the PoE model is able to feed each PoE port up to 30 Watt at each PoE port for various IP PD devices. It supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE ports can be Enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.


Galvanic isolation between power input and Ethernet power system, also the PoE galvanic isolation provides insulation between the power input to PoE Ethernet ports, preventing cabling and grounding incidents from damaging the Ethernet switch. The efficiency of the galvanically decoupled voltage converters can reach above 90%.


Lantech OS3 Platform with complete L2 management and upgradable optional L3 & communication protocols
The switch runs Lantech OS3 platform which is powerful with complete Layer 2 management features and optional upgradable for future expansion, such as Layer 3 Lite, Layer 3, IEC61375-2-5 (ETBN), etc. To learn more about the Lantech OS3 Platform, please refer to Lantech OS3/OS4 platform


Enhanced cybersecurity features with IEC 62443-4-1 certification
Lantech OS3 platform is designed with high standard of cybersecurity to prevent the threats from network attack such as DDoS attacks. To ensure the safety and reliability of communication networks, Lantech develops our products under strict international security standard and is certified with IEC 62443-4-1 network security standard. To learn more about Lantech cybersecurity software solution, please refer to Lantech OS3/OS4 platform


Miss-wiring avoidance, node failure protection, Loop protection
The switch also embedded several features for strong and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, the switch being able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.


User friendly GUI, Auto topology drawing, Enhanced Environmental Monitoring
The user-friendly UI, innovative auto topology drawing and topology demo makes the switch much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line. It supports enhanced environmental monitoring for actual input voltage, current, ambient temperature and total power load.


Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5 TBN
Lantech OS3 Ethernet switches comply with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (TBN).


Editable configuration file; USB port for import/export configuration
The configuration file of the switch can be imported and edited with word processor for the following switches to configure with ease. The USB port can import/export the configuration from/to USB dongle and also to upgrade firmware from USB dongle. TFTP/HTTP firmware upgrade is supported.


Event log & message; 2DI + 2DO; Factory default pin
The switch provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the outside alarm and switch will send alert information to IP network with traps. The factory reset pin can restore the setting back to factory default.


Dual WVI / 24VI / 24TVI input with max PoE budget and Inrush current protection
The switch accept 16.8~137.5VDC (WVI model) ; 9~36VDC (24VI model) ; 16.8~56VDC (24TVI model) dual input with Ethernet and PoE galvanic isolation and PoE model can feed 54V output for PoE feeding with 80W budget. The inrush current on initial power up can be limited lower than 10 x nominal current.


EN50155, EN45545-2; EN61373 compliance; Rugged design with high ESD protection
The switch is designed to meet with critical network environment with IP67/IP54 aluminum enclosure and M12 connectors for water proof. The switch passed serious tests under extensive Industrial EMI and Safety standards. With EN45545-2 Fire & Smoke and EN50155 verification, it is best switch for railway on-board/track side, vehicle, and mining applications. For more usage flexibilities, the switch supports wide operating temperature from -40°C to 70°C (85°C operation for 10min), which is compliant with the EN50155 Operating Temperature Range Requirement Class OT4.


*Future release
**Optional

SPECIFICATIONS

Hardware Specifications

Standards

IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree
IEEE802.3ad Link Aggregation Control Protocol (LACP)
IEEE802.1AB Link Layer Discovery Protocol (LLDP)
IEEE802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE802.3at/af Power over Ethernet

Switch Architecture

Back-plane (Switching Fabric): 32Gbps

Mac Address

16K MAC address table

Jumbo frame

10KB

Connectors

10/100/1000T: 16 x M12 8-pole X-coded with Auto MDI/MDI function
Power Input connector: 1 x M12 4-pole A-coded
Reset/Console/USB : 1 x M12 8-pole A-coded
DIDO: 1 x M12 5-pole A-coded

Network Cable

10Base-T: 2-pair STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair STP Cat. 5/ 5E/ 6 cable; EIA/TIA-568 100-ohm (100m)
1000Base-T: 4-pair STP Cat5E/6 cable

LED

Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green)
10/100/1000T Ethernet port: Link/Activity (Green)
PoE: Link/Act (Green) (PoE model)

DI/DO

2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 80 VDC, 50mA

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-40°C~70°C / -40°F~158°F (85°C operation for 10min.)

Storage Temperature

-40°C~85°C / -40°F~165°F

Power Supply

Dual DC input,
16.8~137.5VDC (WVI model)
9~36VDC (24VI model)
16.8~56VDC (24TVI model)
(PoE galvanic isolation for PoE models; Ethernet galvanic isolation for all models)

PoE Budget (PoE model)

80W@24VDC
Higher PoE budget can be applied upon request. **

PoE pin assignment (PoE model)

M12 port # 1~ # 8/16 support IEEE 802.3at/af End-point. Per port provides up to 30W

Power Consumption

Max. 33.8W (exclude PoE load)

Case Dimension

IP67/IP54 model: Aluminum case
304mm(W)x195mm(H)x89.5mm(D)

Weight

3.45kgs

Installation

Wall Mount Design

EMI & EMS

FCC Part 15 Class A,
IEC/EN61000-6-2
CE EN55032 Class A
CE EN55024
CE EN61000-4-2 (ESD) Level 3
CE EN61000-4-3 (RS) Level 3
CE EN61000-4-4 (EFT) Level 3
CE EN61000-4-5 ED3 (Surge) Level 3
CE EN61000-4-6 (CS) Level 3
CE EN61000-4-8 (Magnetic field) Level 3
BS EN61000-4-2, BS EN61000-4-3,
BS EN61000-4-4, BS EN61000-4-5,
BS EN61000-4-6, BS EN61000-4-8,
BS EN55032, BS EN55024

Verifications

EN50155/EN50121-3-2/EN50121-4;
EN 45545-1, EN 45545-2 Fire & Smoke verification

Vehicle Certificate

E24 marking (UN ECE R10) (24VI model)*

Stability Testing

EN61373 (Shock and Vibration)

MTBF

551,745 hrs (IEC 62380 standards)

Warranty

5 years

Software Specifications

Lantech OS3 Platform

Learn more about Lantech OS3 Platform

*Future release
**Optional

DIMENSION

ORDERING INFORMATION

All model packages include M12 caps. For Coating add –C to Model Name.

P/N Model name Description
8361-4312 TPGS-L5016T-8-54-WVI 16 10/100/1000T M12 X-coded w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~137.5VDC dual input; IP54 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-431 TPGS-L5016T-16-54-WVI 16 10/100/1000T M12 X-coded w/16 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~137.5VDC dual input; IP54 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-4317 TPGS-L5016T-8-54-24VI 16 10/100/1000T M12 X-coded w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 9~36VDC dual input; IP54 housing; -40°C to 70°C w/ PoE galvanic isolation; E-marking certified*
8361-4318 TPGS-L5016T-16-54-24VI 16 10/100/1000T M12 X-coded w/16 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 9~36VDC dual input; IP54 housing; -40°C to 70°C w/ PoE galvanic isolation; E-marking certified*
8361-43171 TPGS-L5016T-8-54-24TVI 16 10/100/1000T M12 X-coded w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~56VDC dual input; IP54 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-43181 TPGS-L5016T-16-54-24TVI 16 10/100/1000T M12 X-coded w/16 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~56VDC dual input; IP54 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-4311 TGS-L5016T-54-WVI 16 10/100/1000T M12 X-coded EN50155 OS3 Managed Ethernet Switch; 16.8~137.5VDC dual input; IP54 housing; -40°C to 70°C w/ galvanic isolation
8361-4319 TGS-L5016T-54-24VI 16 10/100/1000T M12 X-coded EN50155 OS3 Managed Ethernet Switch; 9~36VDC dual input; IP54 housing; -40°C to 70°C w/ galvanic isolation; E-marking certified*
8361-43191 TGS-L5016T-54-24TVI 16 10/100/1000T M12 X-coded EN50155 OS3 Managed Ethernet Switch; 16.8~56VDC dual input; IP54 housing; -40°C to 70°C w/ galvanic isolation
8361-43122 TPGS-L5016T-8-67-WVI 16 10/100/1000T M12 X-coded w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~137.5VDC dual input; IP67 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-43102 TPGS-L5016T-16-67-WVI 16 10/100/1000T M12 X-coded w/16 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~137.5VDC dual input; IP67 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-43172 TPGS-L5016T-8-67-24VI 16 10/100/1000T M12 X-coded w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 9~36VDC dual input; IP67 housing; -40°C to 70°C w/ PoE galvanic isolation; E-marking certified*
8361-43182 TPGS-L5016T-16-67-24VI 16 10/100/1000T M12 X-coded w/16 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 9~36VDC dual input; IP67 housing; -40°C to 70°C w/ PoE galvanic isolation; E-marking certified*
8361-43173 TPGS-L5016T-8-67-24TVI 16 10/100/1000T M12 X-coded w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~56VDC dual input; IP67 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-43183 TPGS-L5016T-16-67-24TVI 16 10/100/1000T M12 X-coded w/16 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8~56VDC dual input; IP67 housing; -40°C to 70°C w/ PoE galvanic isolation
8361-43112 TGS-L5016T-67-WVI 16 10/100/1000T M12 X-coded EN50155 OS3 Managed Ethernet Switch; 16.8~137.5VDC dual input; IP67 housing; -40°C to 70°C w/ galvanic isolation
8361-43192 TGS-L5016T-67-24VI 16 10/100/1000T M12 X-coded EN50155 OS3 Managed Ethernet Switch; 9~36VDC dual input; IP67 housing; -40°C to 70°C w/ galvanic isolation; E-marking certified*
8361-43193 TGS-L5016T-67-24TVI 16 10/100/1000T M12 X-coded EN50155 OS3 Managed Ethernet Switch; 16.8~56VDC dual input; IP67 housing; -40°C to 70°C w/ galvanic isolation


OPTIONAL ACCESSORIES - Software package

Please refer to Lantech OS3/OS4 platform


OPTIONAL ACCESSORIES - Connector

Model name Description
ECONM12-04A(F)-C-180 4 pin M12 (Female) A-coded 180 degree crimp type connector for power supply
ECONM12-08A(M)-180 8 pin M12 (Male) A-coded 180 degree crimp type connector for reset/console/USB
ECONM12-05A(M)-C-180 5 pin M12 (Male) A-coded 180 degree crimp type connector for DI/DO
ECONM12-08X(M)-SPEEDCON 8 pin M12 (Male) X-coded 180 degree crimp type connector for data, Ethernet CAT6A (10G), shielded, SPEEDCON


OPTIONAL ACCESSORIES - Cable

Model name Description
ECONM12-4P(F)1.5M CABLE 4 pin M12 (Female) A-coded 90 degree cable for power supply, 150cm
ECONM12-08M2-CONSOLE 8 pin M12 (Male) A-coded 180 degree to RS232 cable for console, 150cm
ECABM12X83MSTP 8 pin M12 (Male) X-coded 180 degree RJ45 STP cable for data, shielded, 300cm


OPTIONAL ACCESSORIES - Others

Model name Description
M12 to USB interface adapter 8 pin M12 (Male) A-coded 180 degree M12 to USB 2.0 interface adapter, 8cm
USB 2.0 Ethernet Adapter USB 2.0 to RJ45 Ethernet Adapter
ECONM12-08(M) TO DB9+USB2.0-1.5M CABLE 8 pin M12 (Male) A-coded 180 degree M12 to USB2.0 to DB9 (Female) cable, 150cm