Lantech TES-5424T (IP54) is a high performance L2+ (Gigabit uplink) switch with 24 10/100TX+ 4 10/100/1000T by M12 provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ are supported and also required in large network. It also supports10K Jumbo frame.
Enhanced G.8032 ring, 16 MSTI MSTP; Optional MRP ring
Lantech TES-5424T (P54) features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 16 MSTI.
Optional MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
QoS by VLAN for legacy devices to tag with priority
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.
QinQ, QinQ and GVRP supported
It supports the QinQ, QinQ, GVRP for large VLAN segmentation.
IGMPv3,GMRP, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port and static multicast forwarding binding by ports for video surveillance application.
Miss-wiring avoidance, Loop protection, Auto re-powered ring restore
The TES-5424T (IP54) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech TES-5424T (IP54) is able to alert with the LED indicator and disable ring automatically. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server**
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.
Editable configuration file
The configuration file of Lantech TES-5424T (IP54)can be exported and edited with word processor for the other switches configuration with ease. The factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead.
The optional N-key configurator offers firmware upgrade, auto/editable configuration back up and restoration without computer by adjusting the DIP switch.
User friendly UI, Auto topology drawing, complete CLI
The user friendly UI, innovative auto topology drawing and topology demo makes TES-5424T (IP54) much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
DIDO w/email** trap and SMS** alerting
In case of event alarm, the TES-5424T (IP54) will immediately send an email** & SMS** text message to pre-defined addresses as well as SNMP Traps out. It provides 1DI and 1DO while disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.
Galvanic isolation; wide dual input range model (WV)
The Lantech TES-5424T-WV model can take dual 16.8V~137.5V power input. It provides galvanic isolation protection from power input/Ethernet port to case ground and from power input to Ethernet port.
The TES-5424T (IP54) also provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet.
Built-in environmental monitoring to show switch inside info
The built-in environmental monitoring can detect switch overall temperature, input voltage and current and can send the SNMP traps, email and SMS** alert when abnormal.
EN50155 for rolling stock, EN45545 fire and smoke verification
The TES-5424T (IP54) is designed to meet with critical network environment with IP54 aluminum enclosure and M12 connectors for water proof. It passed tests under extensive Industrial EMI and Safety standards. With EN45545-2 Fire & Smoke, and EN50155 verification, the TES-5424T (IP54) is best for railway in train/track side, vehicle and mining applications. For more usage flexibilities, TES-5424T (IP54) supports wide operating temperature from -40°C to 75°C.
Optional bypass relay prevent from power lost
The optional bypass relay is set to bypass the switch to the next one in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. (-B/-BB model)
|8361-840||TES-5424T-54-WV||24 10/100TX + 4 GigaT EN50155 M12 IP54 L2+ Managed Ethernet Switch; 16.8V~137.5V dual input; -40°C to 75°C|
|8850-100||N-key Configurator||RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 60C|
|ECONM23-5P(F)70CM CABLE||M23 power cable 90 degree angle, 70cm, 5 pin, Made in Taiwan|
|ECONM23-5P(F)70CM CABLE-C||M23 power cable 90 degree angle, 70cm, 5 pin, Made in China|
|ECONM23-5P(F)S-90||M23 5Pin female 90 degree screw type connector|
|ECONM23-5P(F)S-180||M23 5Pin female 180 degree screw type connector|
|ECABM12X83MSTP||8Pin M12 X-coded 3 Meters, STP cable|
|ECAB124030MJS||4 Pin M12 RJ45 Male 3 Meters; STP Cable|