Industrial Multifunction VPN Router w/up to 2x WiFi 11ac + 2 serial ports** + 2 Gigabit Ethernet (incl.1 PD) w/Load Balancing, VPN, Protocol Gateway, Storage**; 24V/HV input

  • Up to 2 concurrent WI-FI 11ac and redundancy(2AC model)
  • Built-in 2 Gigabit Ethernet ports (1LAN+1WAN or 2LAN) (incl. 1PD)
  • Dual radio for 802.11ac/a/b/g/n with concurrent 5GHz & 5GHz bands up to 2.6Gbps Wi-Fi bandwidth (2AC model)
  • MIMO technology 3T3R; SMA type up to 6 external antenna
  • VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, PPTP, L2 over GRE , IPGRE
  • Load Balancing support 8 mechanism
  • Support NAT and Firewall
  • Optional EMMC Flash storage on-board**
  • Support Modbus gateway
  • Support Client-base roaming
  • Supports AP/ Bridge/Client/MESH modes
  • Support 802.11s Wireless Mesh Network
  • Support 2 RS422/485 ports with 2.5KV isolation or 2x RS232 ports
  • Dual Input voltage 9~56VDC (24V model); Dual Input 24V-30VDC (24V-IGN model) ;Single input power 90~305VAC/120~430VDC (HV model) (M12 model)
  • Ignition sensing on 24V model
  • Vehicle E-mar king* certificate
  • Wi-Fi graphic signal strength
  • ITxPT design w/ ignition function*
  • Editable login page of captive portal for hot-spot application
  • USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware
  • EN50155/61373/45545 verification for railway application (except 24V-IGN model)


EN50155 FCC CE UKCA WEEE RoHS2


Datasheet   Hardware Manual  
For latest firmware and web UI user manual, please send request to support@lantechcom.tw

OVERVIEW

Lantech IWAP-3002 series is a next generation industrial multi-function VPN router w/up to 2x 802.11ac Wi-Fi + 2x Gigabit Ethernet (incl.1 PD + 2 serial ports** that supports advanced function of VPN, Load-Balancing, EMMC Flash storage**, Protocol gateway(Modbus), and Wi-Fi roaming. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.


Support AP/Bridge/Client mode, Mesh roaming
IWAP-3002 supports AP/Bridge/Client mode for different applications. It also supports client-base roaming to swap between the APs in a network.


Built-in Wireless Mesh network(WMN)
IWAP-3002 supports Mesh networks composed of different nodes. The set of SSIDs allow the wireless client to roam freely without the need for complicated account management. With Mesh protocol, it can provide a reliable, scalable, stable and seamless network topology.


IEEE 802.11ac dual band radio up to 2.6Gbps bandwidth
With IEEE 802.11ac capability, IWAP-3002 can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 2.6Gbps bandwidth 1.3GMbps per 802.11ac module). It is also compatible with 802.11b/g/n that can work with 2.4GHz for longer range transmission. The Wi-Fi 11ac supports AP/Bridge/AP Client modes can be diverse for most of wireless application. Working with load-Balancing “Priority” mode, the AP client can enable router to transmit on Wi-Fi with first priority.


Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity


MIMO technology with 3T3R and SMA type connectors
Lantech IWAP-3002 series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable Omni connectors and optional antennas, IWAP-3002 can have better Wi-Fi coverage.


Wireless WMM QoS
IWAP-3002 supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (Wi-Fi multimedia)


Advanced security & 16 SSIDs
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP, AES), 802.1x ensures the best security and active defense against security treads. Lantech IWAP-3002 support up to 16 SSIDs, each SSID has its independent security and encryption.


Load Balancing with 5 mechanism for multi-WANs
IWAP-3002 supports Load Balancing for WAN (client mode) connections. There are five schemes for Load Balancing function:


Pack

Algorithm

Description

Basic

Fixed

All traffic will be distributed to a single WAN.

Failover

Routes connections through preferred WAN link while others stand-by. Sequentially activating another link if the preferred link fails.

Priority

Select the active WAN according to priority. 

Weighted Round-Robin

Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.

Custom Route

Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.


2 port serial connection, Modbus gateway
It builds in 2 port serial connection for RS232, RS422, 485 in which RS422/485 has 2.5KV isolation protection. The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.


VPN and firewall
Besides traditional VPN peer to peer tunneling, IWAP-3002 support latest Multi-Site VPN function that is an efficient way for Mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, PPTP, L2 over GRE, IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP / UDP port number.


Email notice; Event log; Remote Web control
In case of events, the IWAP-3002 will immediately send email and trap. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.


24V/HV input voltage selection: dual 9V-56VDC (24V model) or dual 24V-30VDC (24V-IGN model) or single 90~305VAC/120~430VDC (HV model)
The IWAP-3002 is able to work from 9VDC to 56VDC (24V model) or dual 24V-30VDC (24V-IGN model). Or with single high power supply at 90~305VAC / 120~430VDC (HV model).


Built-in 2 port Gigabit Ethernet
Two port Gigabit Ethernet can be supported as 1LAN+1WAN or 2LAN models.


Graphic Wi-Fi signal strength
The graphic Wi-Fi signal strength shows connection status at a glance


USB port for back up, restore configuration and upgrade firmware; Dual image firmware
The built-in USB port can upload/download the configuration and upgrade firmware through USB dongle for router replacement. It supports dual-image firmware to choose which one to start.


Ignition Sensing
Ignition sense allows you to delay power off the router with a designated time delay.


Editable login page of captive portal
The IWAP-3002 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.


Ruggedized industrial design and FCC, CE certificate
The IWAP-3002 is designed to meet with outdoor network environment with IP30 (IP43 for M12 model) housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for Wi-Fi, the IWAP-3002 is best for outdoor community, vehicle, and process control automation applications. For more usage flexibilities, IWAP-3002 supports wide operating temperature from -20°C to 70°C or -40°C to 70°C (-E)


EN50155, EN61373 verification; E-marking** certification; ITxPT** design
The IWAP-3002 series is also applicable for railway on-board/track side, vehicle and mining applications for more usage flexibilities. The series is verified with EN50155, EN61373, and EN45545 for railway applications (Except 24V-IGN model). The E-marking certificate (24V model) and ITxPT design (24V-IGN model).


*Future Release
**Optional

FEATURES

  • High Speed Air Connectivity: WLAN interface support up to 2.6Gbps link speed(2AC) or 1.3GMbps (1AC)
  • Built-in two Gigabit ports and 1LAN+1WAN or 2LAN
  • Dual band 2.4G and 5GHz with 802.11ac/a/b/g/n
  • Support 2.4Ghz operating within the following frequency bands:
  • 2.412~2.472 GHz
  • Support 5Ghz operating within the following frequency bands:
  • 5.180~5.825 GHz
  • MIMO smart antenna technology with 3T3R with 6 SMA type connectors and optional antennas
  • High-sustainability: if one link member is down or severely interfered, the other link will keep the network traffic alive.
  • Aggregated bandwidth: The bandwidth of two link members can be aggregated to provide maximum throughput.
  • IEEE 802.11h DFS and automatic TPC
  • Output power : <24dBM
  • EMMC-FLASH storage**8/16/32G
  • Transmit power adjustment
  • VAP (virtual access point) support up to 16 SSIDs
  • Operation modes : AP / Bridge / Client
  • Traffic control for each SSID
  • Band preference for same SSID services on dual band
  • Highly Security Capability: WEP64/128bits/ WPA/ WPA-PSK (TKIP,AES)/ WPA2/ WPA2-PSK (TKIP,AES)
  • HTTP/HTTPS/Telnet/SSH & Administration access
  • Support IPv6 & IPv4 protocol
  • Radius Authentication, EAP-TLS, EAP-TTLS, PEAP; SSID broadcast disable supported
  • Multiple channel bandwidths of 20MHz and 40MHz for 2.4G.
  • Multiple channel bandwidths of 20MHz, 40MHz and 80MHz for 5G only.                                  
  • Wi-Fi Multimedia (WMM) and 802.11e traffic prioritization
  • Support AP/Bridge/Client/MESH mode
  • Support Client-base roaming
  • Support 802.11s Wireless Mesh Network
  • Support Multi-Site VPN for Mesh tunneling as well as Open VPN, L2TP over IPsec, IPsec, PPTP, L2 over GRE , IPGRE and NAT for secured network connection
  • The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number
  • NAT/DMZ/Port Forwarding
  • Support SNMP v1/v2c/v3
  • Load Balancing supports 5 mechanism between multiple WANs
  • Pack

    Algorithm

    Description

    Basic

    Fixed

    All traffic will be distributed to a single WAN.

    Failover

    Routes connections through preferred WAN link while others stand-by. Sequentially activating another link if the preferred link fails.

    Priority

    Select the active WAN according to priority. 

    Weighted Round-Robin

    Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.

    Custom Route

    Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.


  • Built-in 2 x serial ports**(RS232/RS422/485)
  • Serial port** with 2.5KV isolation on RS422/485
  • Built-in Modbus gateway converting Modbus RTU/ASCII to Modbus/TCP
  • Event alerting by Syslog, SNMP Trap, Email, Relay ; Permanent local log rotation / Maxi 1K records
  • Remote Web control to get status or re-boot by Web
  • Built-in RTC to keep track of time always
  • Support SNTP to synchronize system clock
  • Support LLDP discovery protocol
  • Support DHCP Server and Client
  • Reset button for factory default mode
  • Graphic WI-FI signal strength
  • Firmware upgradeable through TFTP/FTP/HTTP
  • Configuration backup and restoration
    • Supports text configuration file for system quick installation
    • USB port to upload/download firmware by USB dongle
  • Support editable captive portal login page
  • IP 30 /IP43(M12 model) housing for industrial environment
  • DIN-Rail and Wall-mount** installation
  • Operation temperature -20~70C or -40°C to 70°C (-E)
  • ITxPT design w/ ignition function*
  • EN50155 & EN61373 verification (Except 24V-IGN model)
  • Wide range input voltage from 9V-56V (24V model) ; dual input 24V-30VDC (24V-IGN model)
*Future Release
**Optional

SPECIFICATIONS

WLAN Interface

Radio Frequency Type

DSSS, OFDM

Wireless Standard

IEEE 802.11ac/n/a 5GHz
IEEE 802.11b/g/n 2.4GHz

Wireless bandwidth

5GHz: Up to 1300Mbps
2.4GHz: Up to 450Mbps

Modulation

802.11b: DSSS
802.11a/g:
OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11n:
OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11ac:
OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM)

Operating Frequency

IEEE 802.11 a/b/g/n ISM Band, 2.412GHz~2.472GHz, 5150MHz~5850MHz

Transmission Rate

IEEE802.11ac: up to 1300Mbps
IEEE802.11b: 1 / 2 / 5.5 / 11 Mbps
IEEE802.11a/g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps
IEEE802.11n: up to 450Mbps

IEEE 802.11b/g/n(2.4Gbps)

Output Power Tx +/- 2dB(per chain)
18dBm @ 1~11Mbps
18dBm @ 6~54Mbps
20/20dBm @ MCS0~MCS7 (HT20/40)
Receiver Sensitivity Rx +/- 2dB
≦-95dBm @ 1~11Mbps
≦-92dBm @ 6~18Mbps
≦-88dBm @ 24Mbps
≦-85dBm @ 36Mbps
≦-81dBm @ 48Mbps
≦-80dBm @ 54Mbps
≦-94dBm @ MCS0 (HT20/40)
≦-76dBm @ MCS7 (HT20/40)

IEEE 802.11a/n/ac(5Gbps)

Output Power Tx +/- 2dB(per chain)
20dBm @ 6~24Mbps
16dBm @ 36~54Mbps
19/18dBm @ MCS0 (HT20/40)
16/16dBm @ MCS7 (HT20/40)
19/18/18dBm @ MCS0 (VHT20/40/80)
13/13/13dBm @ MCS8 (VHT20/40/80)
13/13dBm @ MCS9 (VHT40/80)
Receiver Sensitivity Rx +/- 2dB
≦-92dBm @ 6~18Mbps
≦-86dBm @ 24Mbps
≦-84dBm @ 36Mbps
≦-81dBm @ 48Mbps
≦-80dBm @ 54Mbps
≦-93dBm @ MCS0 (HT20/40)
≦-71dBm/≦-80dBm @ MCS7 (HT20/40)
≦-90dBm @ MCS0 (VHT20/40/80)
≦-69dBm @ MCS8 (VHT20/40/80)
≦-66dBm @ MCS9 (VHT40/80

Encryption Security

WEP : (64-bit ,128-bit key supported)
WPA /WPA2 : IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
EAP,MD5,EAP,TLS,EAP,TTLS,EAP
PEAP

Wireless Security

SSID broadcast disable

Physical Ports & System

Connectors

10/100/1000T: 2x ports RJ 45 with Auto MDI/MDI-X function (2 x10/100/1000T; 8 pin X coded-M12 model)
USB x 1
RS-232 connector: 1 x RJ 45
Serial connector : 2 DB9
SMA connector : 6 male
Power & P-Fail connector: 1 x 6-pole terminal block

Serial Baud Rate

1000Kbps high data rate, 250kbps normal for RS232 ; 20Mbps high data rate, 250kbps normal for RS422/485

Serial Data Bits

5, 6, 7, 8

Serial Parity

odd, even, none, mark, space

Serial Stop Bits

1, 1.5, 2

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

Tx+, Tx-, Rx+, Rx-, GND

RS-485 (2-wire)

Data+, Data, GND

Isolation protection

RS422/485 2.5KV isolation; 8KV contact & 15KV air
RS232 8KV contact and 15KV air ESD
Input power 1.5KVA isolation

EMMC Storage**

8/16/32 GB

LED Indicators

Power & System indicator

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red) , Storage(Green), Serial1/Serial2(Green)

10/100/1000Base-T(X) port indicator

Link/Activity (Green), Speed (1000T: Yellow; 10/100TX: off)

WLAN LEDs

WLAN 1 , WLAN2  Link /ACT : Green

Fault

Red: Ethernet link down or power down

Fault Contact

Relay

Relay output to carry capacity of 1A at 24VDC

Power

Input power

Dual DC input, 9~56VDC (24V model)
Dual DC input, 24~30VDC (24V-IGN model)
Single HV input, 90~305VAC/120~430VDC (HV model)

Power consumption (Typ.)

20 Watts

Physical Characteristic

Enclosure

IP 30 Metal case / IP43 (M12 model) Metal case

Dimension

74 (W) x 114 (D) x 152 (H) mm (24V model)
74(W) x 114(D) X 152 (H)mm ( M12 model)
82 (W) x 172 (D) x 152 (H) mm (HV model)

Weight

900g

Environmental

Storage Temperature

-40°C ~ 85°C (-40°F ~ 185°F)

Operating Temperature

-20°C ~ 70°C (-4°F ~ 158°F)
-40°C ~ 70°C (-40°F ~ 158°F)(-E)

Operating Humidity

5% to 95% Non-condensing

Regulatory Approvals

Safety

EN 62368-1

EMC

FCC Part 15B Class A,
ICES-003 ISSUE7,
EN 55032: 2015,
EN 55024: 2015
IEC 61000-6-2,
IEC 61000-6-4
BS EN55032,
BS EN55024

EMS

IEC 61000-4-2 (ESD),
IEC 61000-4-3 (RS),
IEC 61000-4-4 (EFT),
IEC 61000-4-5 (Surge),
IEC 61000-4-6 (CS),
IEC 61000-4-8 (PFMF)
BS EN61000-4-2,
BS EN61000-4-3,
BS EN61000-4-4,
BS EN61000-4-5,
BS EN61000-4-6,
BS EN61000-4-8,

Radio Frequency

EN 301 489-1,
EN 301 489-17,
EN 301 489-19,
EN 301 489-52,
EN 302 502,
EN 301 893,
EN 300 328,
EN 62311

Stability Testing

IEC 60068-2-27 (Shock)
IEC 60068-2-31 (Shock)
IEC 60068-2-64 (Vibration)
IEC 60068-2-80 (Vibration)

Vehicle Certificate
(24V model)

E13 marking** (UN ECE R10)

Vehicle Compliance
(24V model)

UN ECE R118, ITxPT design**
(ITxPT design is IGN model only)

Railway Compliance
(Except -IGN model)

EN50155
EN61373
EN45545
IEC 60571

MTBF

NA

Warranty

5 years

Software

IPv6/4

Present

Operation Mode

AP/Bridge/Client/MESH mode

Login Security

Supports IEEE802.1x Authentication/RADIUS

Access Security

HTTP/HTTPS/Telnet/SSH & Administration; SNMP v1/v2/v3 access for authentication via MD5/SHA(v3) and Encryption via DES/AES(v3)

Protocol

PPPoE Client,DHCP server/client, Adjustable MTU, Port forwarding (NAPT), DMZ; NAT, SNTP, Firewall(Firewall(DDoS; IP address filter / Mac address filter /  TCP/UDP port name),VRRP, DDNS

Management

SNMP v1,v2c,v3/ Web/Telnet/CLI

Roaming

Client-base roaming

MESH

Support 802.1s

WMM

Wi-Fi multimedia and 802.11e traffic prioritization

Security

WEP64/128bits/ WPA/ WPA-PSK (TKIP,AES)/ WPA2/ WPA2-PSK (TKIP,AES)/SSH/SSL/HTTPS

Authentication

Radius Authentication, EAP-TLS, EAP-TTLS, PEAP; SSID broadcast disable supported

SSID

16 sets

Timer

Built-in Real Time Clock to keep track of time always(RTC)

Discovery

IEEE 802.1ab Link Layer Discovery Protocol (LLDP)

SNMP trap

Device cold / warm start
Port link up / link down
DI / DO high / low

Graphic signal display

GraphicWi-Fi signal strength & TX / RX rate display

Remote Web control

To reboot or get status of router by WebUI

Captive portal

Editable captive portal login page

Maintenance

Firmware upgradeable through TFTP/HTTP

Configuration backup & restore

Supports text configuration file for quick system installation
USB port to upload/download firmware by USB dongle

Software - Load Balancing

5 schemes for multiple WAN(client mode)

Pack

Algorithm

Description

Basic

 

Fixed

All traffic will be distributed to a single WAN.

Failover

Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link failure occurs.

Priority

Routes connections through preferred WAN link while others stand-by. Sequentially activate other links if overflow occurs.

Weighted Round-Robin

Evenly distribute the traffic over all working WAN links in circular order according to the specified weights

Custom Route

Routing through the selected WAN for each specific traffic ex: TCP/UDP port number and IP address.

*Future Release
**Optional

RF PERFORMANCE TABLE

 

Data Rate

TX Power (per chain)

TX Power
(3 chains)

Tolerance

RX Specifications Sensitivity

Tolerance

2.4GHz
802.11b

1Mbps

20dBm

25dBm

±2dB

-95dBm

±2dB

2Mbps

20dBm

25dBm

±2dB

-94dBm

±2dB

5.5Mbps

20dBm

25dBm

±2dB

-92dBm

±2dB

11Mbps

20dBm

25dBm

±2dB

-90dBm

±2dB

2.4GHz
802.11g

6Mbps

21dBm

26dBm

±2dB

-94dBm

±2dB

9Mbps

21dBm

26dBm

±2dB

-93dBm

±2dB

12Mbps

21dBm

26dBm

±2dB

-93dBm

±2dB

18Mbps

21dBm

26dBm

±2dB

-90dBm

±2dB

24Mbps

21dBm

26dBm

±2dB

-90dBm

±2dB

36Mbps

20dBm

25dBm

±2dB

-85dBm

±2dB

48Mbps

19dBm

24dBm

±2dB

-82dBm

±2dB

54Mbps

18dBm

23dBm

±2dB

-80dBm

±2dB

2.4GHz
802.11n
HT20

MCS 0

21dBm

26dBm

±2dB

-94dBm

±2dB

MCS 1

21dBm

26dBm

±2dB

-92dBm

±2dB

MCS 2

21dBm

26dBm

±2dB

-89dBm

±2dB

MCS 3

20dBm

25dBm

±2dB

-84dBm

±2dB

MCS 4

20dBm

25dBm

±2dB

-83dBm

±2dB

MCS 5

20dBm

25dBm

±2dB

-80dBm

±2dB

MCS 6

18dBm

23dBm

±2dB

-79dBm

±2dB

MCS 7

16dBm

21dBm

±2dB

-77dBm

±2dB

2.4GHz
802.11n
HT40

MCS 0

20dBm

25dBm

±2dB

-93dBm

±2dB

MCS 1

20dBm

25dBm

±2dB

-91dBm

±2dB

MCS 2

20dBm

25dBm

±2dB

-89dBm

±2dB

MCS 3

19dBm

24dBm

±2dB

-84dBm

±2dB

MCS 4

19dBm

24dBm

±2dB

-82dBm

±2dB

MCS 5

19dBm

24dBm

±2dB

-80dBm

±2dB

MCS 6

18dBm

23dBm

±2dB

-79dBm

±2dB

MCS 7

16dBm

21dBm

±2dB

-75dBm

±2dB

 

Data Rate

TX Power (per chain)

TX Power
(3 chains)

Tolerance

RX Specifications Sensitivity

Tolerance

5GHz
802.11a

6Mbps

20dBm

25dBm

±2dB

-94dBm

±2dB

9Mbps

20dBm

25dBm

±2dB

-94dBm

±2dB

12Mbps

20dBm

25dBm

±2dB

-92dBm

±2dB

18Mbps

20dBm

25dBm

±2dB

-91dBm

±2dB

24Mbps

20dBm

25dBm

±2dB

-90dBm

±2dB

36Mbps

18dBm

23dBm

±2dB

-86dBm

±2dB

48Mbps

16dBm

21dBm

±2dB

-83dBm

±2dB

54Mbps

15dBm

20dBm

±2dB

-80dBm

±2dB

5GHz
802.11n/ac
VHT20

MCS 0

19dBm

24dBm

±2dB

-93dBm

±2dB

MCS 1

19dBm

24dBm

±2dB

-90dBm

±2dB

MCS 2

19dBm

24dBm

±2dB

-87dBm

±2dB

MCS 3

18dBm

23dBm

±2dB

-83dBm

±2dB

MCS 4

18dBm

23dBm

±2dB

-80dBm

±2dB

MCS 5

17dBm

22dBm

±2dB

-77dBm

±2dB

MCS 6

16dBm

21dBm

±2dB

-74dBm

±2dB

MCS 7

14dBm

19dBm

±2dB

-73dBm

±2dB

MCS 8

13dBm

18dBm

±2dB

-71dBm

±2dB

5GHz
802.11n/ac
VHT40

MCS 0

18dBm

23dBm

±2dB

-90dBm

±2dB

MCS 1

18dBm

23dBm

±2dB

-88dBm

±2dB

MCS 2

18dBm

23dBm

±2dB

-85dBm

±2dB

MCS 3

17dBm

22dBm

±2dB

-82dBm

±2dB

MCS 4

17dBm

22dBm

±2dB

-80dBm

±2dB

MCS 5

16dBm

21dBm

±2dB

-75dBm

±2dB

MCS 6

15dBm

20dBm

±2dB

-73dBm

±2dB

MCS 7

14dBm

19dBm

±2dB

-73dBm

±2dB

MCS 8

13dBm

18dBm

±2dB

-70dBm

±2dB

MCS 9

13dBm

18dBm

±2dB

-68dBm

±2dB

5GHz
802.11ac
VHT80

MCS 0

18dBm

23dBm

±2dB

-89dBm

±2dB

MCS 1

18dBm

23dBm

±2dB

-87dBm

±2dB

MCS 2

18dBm

23dBm

±2dB

-85dBm

±2dB

MCS 3

17dBm

22dBm

±2dB

-83dBm

±2dB

MCS 4

17dBm

22dBm

±2dB

-80dBm

±2dB

MCS 5

16dBm

21dBm

±2dB

-78dBm

±2dB

MCS 6

15dBm

20dBm

±2dB

-75dBm

±2dB

MCS 7

14dBm

19dBm

±2dB

-72dBm

±2dB

MCS 8

13dBm

18dBm

±2dB

-70dBm

±2dB

MCS 9

13dBm

18dBm

±2dB

-68dBm

±2dB

DIMENSION

24V model

HV model

M12 model

ORDER INFORMATION

For -40~70C operational temperature model, the model name will add –E
M12 model are all available with –M12 model name (-2S / -2SA is RJ45 model only)
For 24V model are all available with –IGN model name (w/ ignition)

P/N Model name Description
8612-113 IWAP-3002-1AC-24V One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-101 IWAP-3002-1AC-2S-24V One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/ 2 RS232 serial ports and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-102 IWAP-3002-1AC-2SA-24V One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/ 2 RS422 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-110 IWAP-3002-1AC-2SB-24V One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/ 2 RS485 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-114 IWAP-3002-2AC-24V Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-103 IWAP-3002-2AC-2S-24V Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/2 RS232 serial ports and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-104 IWAP-3002-2AC-2SA-24V Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/2 RS422 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-111 IWAP-3002-2AC-2SB-24V Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/2 RS485 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); dual input 9V~56VDC; -20~70C
8612-115 IWAP-3002-1AC-HV One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC; -20~70C
8612-105 IWAP-3002-1AC-2S-HV One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/ 2 RS232 serial ports and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC; -20~70C
8612-106 IWAP-3002-1AC-2SA-HV One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/ 2 RS422 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC; -20~70C
8612-112 IWAP-3002-1AC-2SB-HV One WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/ 2 RS485 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC; -20~70C
8612-116 IWAP-3002-2AC-HV Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC -20~70C
8612-107 IWAP-3002-2AC-2S-HV Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/2 RS232 serial ports and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC -20~70C
8612-108 IWAP-3002-2AC-2SA-HV Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/2 RS422 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC; -20~70C
8612-109 IWAP-3002-2AC-2SB-HV Two WIFI 11ac/a/b/g/n Load Balancing Multifunction Router w/2 RS485 serial isolated ports and 2 port Gigabit Ethernet (incl. 1PD); single high power 90~305VAC / 120~430VDC; -20~70C


EMMC Flash Storage

P/N Description
8850-113 8G
8850-114 16G
8850-115 32G


OPTIONAL ACCESSORIES - Management System

P/N Model name Description
9000-121 InstaAir Cloud Based Fleet Management System for Routers ( View Datasheet )


OPTIONAL ACCESSORIES - Wi-Fi Antenna

Model name Description
ANT11000051
2.4/5GHz SMA dipole Wi-Fi antenna, 3dBi (2.4GHz), 4dBi (5GHz)
ANT11000055
2.4/5GHz SMA dipole Wi-Fi antenna, 6dBi (2.4GHz), 4dBi (5GHz)


OPTIONAL ACCESSORIES - Antenna Base

Model name Description
ADA11000052
Magnetic antenna base for Wi-Fi, RP SMA Jack Base, Length : 1M