4 10/100TX PoE at/af + 2 100SFP Smart Industrial Ethernet Switch w/Pro-Ring 2se

  • Pro-Ring 2se covers Single-Ring Topology
  • Pro-Ring 2se provides Ring recovery time of less than 10ms for up to 50 switches in one Ring
  • Built-in 4port PoE injectors feeding up to 30W per port
  • Advanced PoE Management including of scheduling and detection
  • Wide operating temperature range from -40°C to 70°C


Datasheet   Manual  

OVERVIEW

The Lantech IPES-2204F is a Smart Redundant Ring Ethernet switch with 4 IEEE 802.3at/af High Power PoE + 2 100M SFP ports Industrial Switch. It can be configured easily via web-browser, SNMP.


With smart and easy management functions including Port based VLANs, RSTP/STP and Pro-Ring2se, a self-recovery ring protocol operating in less than 10ms (for up to 50 switches), the IPES-2204F can protect your mission-critical applications from network interruptions or temporary malfunctions. In the case of a power-down, port-down or CPU overload event, IPES-2204F can send SNMP traps and alert emails to 6 pre-defined addresses, and trigger an alarm via the relay contact connection.


The IPES-2204F supports 4 PoE ports meeting with IEEE802.3at/af standard where can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The IPES-2204F-12V is able to receive 12/24V input and boost to 54V output for PoE feeding for 80W(12V) or 120W(24V) budget in vehicle use.


The IPES-2204F is designed to meet the demands of Industrial environments, comes packaged in a robust IP30 housing and has been tested extensively to meet Industrial EMI and EMC standards. Rigorous mechanical testing has also been undertaken to comply with free fall, shock and vibration stability test requirements, which ensure long term reliability in critical industrial environments. The IPES-2204F can be used in extreme environments with an operating temperature range of -40°C~75°C / -40°F~167°F(E model) The Lantech IPES-2204F is the best choice for building automation, factory, and process automation applications.


+Not suitable for multicast application

FEATURES

  • System Interface/Performance
    • 4x10/100 PoE at/af+ 2 100M SFP
    • 2K MAC Address Table
    • Redundant Power Supply Design for DC(48V~56VDC) or DC (9.5V~56VDC)for 12V model
    • Wide operating temperature range from -40°C~70°C / -40°F~158°F(-E model)
  • PoE budget 80W for 12V input; 120W for 24V/48V input
  • PoE management including PoE detection and scheduling for PD (power devices)
  • CPU Load Display and overload alert event
  • Pro-Ring2se covers Single Ring
  • Pro-Ring2se povides a recovery time of less than 10ms for a ring of up to 50 switches
  • RSTP/STP (IEEE 802.1Ss/w/D) for Ethernet Redundancy
  • Supports IEEE802.1ab LLDP
  • DHCP client supported
  • Port based VLANs
  • Security
    • Port Security: Loopback protection to proven loop condition and corrupt ether cable
    • IP Security: 10 IP address access pemission management to prevent unauthorized intruder
    • Disable/enable Web MMI via console/Telnet
  • Multiple notifications of events by emails and traps
  • Web-based, SNMP V1/V2c/V3 Management
  • TFTP Firmware upgrade
  • Reset / Factory default button to restore factory setting
  • IP-30 enclosure with DIN-Rail and wall-mounting design
+Not suitable for multicast application

SPECIFICATIONS

Hardware / Software Specifications

Standards

IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
IEEE 802.1D for STP
IEEE 802.1w for RSTP
IEEE 802.1AB for LLDP

Connectors

10/100TX: 4 x RJ-45 with auto MDI/MDI-X function
2 x 100Base-FX SFP Port

Mac Address

2048 MAC addresses

Switch Properties

Switching bandwidth: 1.2Gbps

Processing

Store-and-Forward

Management

SNMP v1 v2c, v3/ Web

Security Features

Enable/disable port VLAN to segregate and secure network traffic

Spanning Tree

Supports STP/RSTP (IEEE 802.1D/w)

SMTP

SMTP Server and 6 e-mail accounts for receiving event alert

SNTP

SNTP to synchronize system clock in Internet

SNMP trap

Available

System Event Log

Log Server/ SMTP / SNMP trap

Pro-Ring

Pro-Ring2se covers Single Ring Topology. Pro-Ring provides a recovery time of less than 10ms for up to 50 switches

Firmware upgrade

TFTP firmware upgradable

Port Control & Security

Port configuration, status, statistics, monitoring, security

Able to set the state, speed/duplex, flow control, and security of the port

DHCP

DHCP Client

VLAN

Port Based

DNS

Provide DNS client feature support Primary and Secondary DNS server

Input Power

46~56VDC for 48V model
9.6~60VDC for 12V model

PoE Budget

120W@48VDC ; 120W@24VDC ; 80W@12VDC(54V input is recommended for PTZ or heater applications)

Power Consumption (Typ.)

3 Watts Max.

Overload Current Protection

Present

LED

Power Indicator
Green LED x 2
10/100Base-T(X) RJ45 port indicator
Green for port Link/Act. Amber for Duplex/Collision
100Base-FX SFP port indicator
Green for port Link/Act
R.M. indicator
Green : Indicate system operated in Pro-Ring Master mode
Pro-Ring indicator
Green : Indicate port operated in Pro-Ring mode
Fault indicator
Amber : Indicate unexpected event occurred

Enclosure

IP-30

Case Dimension

IP-30,
12V model: 43(W) x 105(D) x 152(H) mm
48V model: 35(W) x 105(D) x 152(H) mm

Operating Humidity

5% to 95% Non-condensing

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)
-40°C~70°C / -40°F~158°F (-E model)

Storage Temperature

-40°C~85°C / -40°F~185°F

EMI

FCC Part 15, CISPR (EN55022) class A

EMS

EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8

Stability Testing

IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

Warranty

5 years

+Not suitable for multicast application

DIMENSION

12V model

48V model

ORDER INFORMATION

P/N Model name Description
8350-130 IPES-2204F-48V 4 10/100TX PoE at/af+ 2 100M SFP Smart Industrial Ethernet PoE Switch w/Pro-Ring2se; 48V input; -20°C to 60°C
8350-131 IPES-2204F-48V-E 4 10/100TX PoE at/af+ 2 100M SFP Smart Industrial Ethernet PoE Switch w/Pro-Ring2se; 48V input; -40°C to 75°C
8350-133 IPES-2204F-12V 4 10/100TX PoE at/af+ 2 100M SFP Smart Industrial Ethernet PoE Switch w/Pro-Ring2se; 12~48V input; -20°C to 60°C
8350-134 IPES-2204F-12V-E 4 10/100TX PoE at/af+ 2 100M SFP Smart Industrial Ethernet PoE Switch w/Pro-Ring2se; 12~48V input; -40°C to 75°C


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
NDR-480 Series 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series 120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series 75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)


OPTIONAL ACCESSORIES - Mini GBIC (SFP)

Model name Description Model name Description
8330-060 100Base FX 2KM, Multi-mode, LC Transceiver 8330-080 125Mbps BiDi SFP 40KM (WDM 1310) Transceiver
8330-065 100Base FX 5KM, Multi-mode, LC Transceiver 8330-082 125Mbps BiDi SFP 40KM (WDM 1550) Transceiver
8330-061 100Base LX 30KM, Single-mode, LC Transceiver 8330-081 125Mbps BiDi SFP 60KM (WDM 1310) Transceiver
8330-071 125Mbps BiDi SFP 2KM (WDM 1310) Transceiver 8330-083 125Mbps BiDi SFP 60KM (WDM 1550) Transceiver
8330-072 125Mbps BiDi SFP 2KM (WDM 1550) Transceiver 8330-084 125Mbps BiDi SFP 80KM (WDM 1310) Transceiver
8330-069 125Mbps BiDi SFP 20KM (WDM 1310) Transceiver 8330-085 125Mbps BiDi SFP 80KM (WDM 1550) Transceiver
8330-068 125Mbps BiDi SFP 20KM (WDM 1550) Transceiver