IPES-0016│Industrial PoE Ethernet Switches│Lantech®

16 10/100TX PoE at/af Industrial Unmanaged Ethernet Switch

Support IEEE802.3at/af up to 30W per port

Dual 9V~36VDC input compliant with ISO 7637-2* (24V model)

Dual 44~56VDC input (48V model)

Galvanic isolation protection (power input /Ethernet port to system/case ground; power input to Ethernet port)

Max PoE budget 100W at 24V input; 240W at 48V input

Relay alarm output for power fail and alarm

E-marking* certificate for vehicle application (-24V model)

Datasheet Manual

OVERVIEW

Lantech IPES-0016 is a high performance 16 10/100TX industrial Ethernet switch w/16 PoE 802.3af/at ports.

Galvanic isolation for dual 24V/48V wide input range
The IPES-0016 supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, high power wireless AP etc. Maximal PoE budget supports up to 100W at 24V input.

The IPES-0016-24V accepts power input 9~36VDC and is compliant with ISO 7637-2* which protects switch from being damaged by high voltage that could be found at vehicle cranky start.

48V model accept 45~56VDC power input and can feed 48V output for PoE feeding in vehicle at max 240W @48V input.

E-marking* certificate, High reliability and extended working temperature
Lantech IPES-0016 provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, Wireless backhaul, Semi-conductor factory and assembly lines.

The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

The E-marking* certificate makes it the most suitable switch for bus, carriage, other vehicles application as well as for industrial areas.

FEATURES

16 10/100TX industrial Ethernet switch w/16 PoE 802.3af/at ports (Total 16 Ports Switch)
PoE budget 100W at 24V input; 240W at 48V input
Dual 9V~36VDC with ISO7637-2* compliance (24V model)
Dual 44~56VDC input (48V model)
Back-plane (Switching Fabric): 3.2Gbps
Provides EFT protection ±2000 VDC for power line
Supports ±6000 VDC Ethernet ESD protection
Galvanic isolation between power input and system/case ground; between Ethernet port and system/case ground; between power input and Ethernet port
E-marking* certificate for vehicle application (-24V model)
Relay alarm output for power fail and alarm
IP30 metal housing with DIN rail and Wall-mount** design

SPECIFICATIONS

Hardware Specifications

Standards	IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3x Flow Control and Back Pressure IEEE802.3at/af Power over Ethernet
Switch Architecture	Back-plane (Switching Fabric): 3.2Gbps
Transfer Rate	14,880pps for Ethernet port 148,800pps for Fast Ethernet port
Mac Address	16K MAC address table
Connectors	10/100TX: 16 x ports RJ-45 with Auto MDI/MDI-X function Power & P-Fail connector: 1 x 6-pole terminal block
Network Cable	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m)
LED	Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red); Ethernet port: Link/Activity (Green)
Operating Humidity	5% ~ 95% (Non-condensing)
Operating Temperature	-20°C~60°C / -4°F~140°F (Standard model) -40°C~75°C / -40°F~167°F(-E model)
Storage Temperature	-40°C~85°C / -40°F~185°F
Power Supply	Dual 9~36VDC (24V model) Dual 44~56VDC (48V model)
PoE Budget	240W at 48V input (50-56VDC input is recommended for 802.3at 30W applications); 100W at 24V input; 80W at 12V input Higher PoE budget can be applied upon request. **
PoE pin assignment	RJ-45 port # 1~#16 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides up to 30W (-14 Model: RJ-45 port # 1~#14 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides up to 30W) Positive (VCC+): RJ-45 pin 1,2 Negative (VCC-): RJ-45 pin 3,6
Power Consumption	13W exclude PoE loads
Galvanic Isolation	Between power input and system/case ground Between Ethernet port and system/case ground Between power input and Ethernet port
Case Dimension	Metal case IP-30 74 (W) x 105 (D) x 152 (H) mm
Weight	900 g
Installation	DIN Rail and Wall Mount** Design
Relay Alarm	Provides one relay output for power fail and alarm. Alarm Relay current carry ability: 1A @ DC24V
EMI & EMS	FCC Class A, CE EN55011, CE EN55032, CE EN55024, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8, CE EN61000-6-2, CE EN61000-6-4
Vehicle certificate	E-Marking* with E13 granted approval (-24V model)
MTBF	927,784 hrs (standards: IEC 62380)
Warranty	5 years

*Future Release **Optional

DIMENSION

ORDERING INFORMATION

All part no. with WALL are models with wall mount kit instead of DIN Rail

P/N	Model name	Description
8351-128	IPES-0016-24V	16 10/100TX Industrial Ethernet Switch w/16 PoE at/af up to 30W, dual 9~36VDC input; compliant with ISO7637-2*; -20°C to 60°C
8351-1281	IPES-0016-14-24V	16 10/100TX Industrial Ethernet Switch w/14 PoE at/af up to 30W, dual 9~36VDC input; compliant with ISO7637-2*; -20°C to 60°C
8351-1282	IPES-0016-48V	16 10/100TX Industrial Ethernet Switch w/16 PoE at/af up to 30W, dual 44~56VDC input; -20°C to 60°C
8351-1283	IPES-0016-14-48V	16 10/100TX Industrial Ethernet Switch w/14 PoE at/af up to 30W, dual 44~56VDC input; -20°C to 60°C
8351-129	IPES-0016-24V-E	16 10/100TX Industrial Ethernet Switch w/16 PoE at/af up to 30W, dual 9~36VDC input; compliant with ISO7637-2*; -40°C to 75°C
8351-1291	IPES-0016-14-24V-E	16 10/100TX Industrial Ethernet Switch w/14 PoE at/af up to 30W, dual 9~36VDC input; compliant with ISO7637-2*; -40°C to 75°C
8351-1292	IPES-0016-48V-E	16 10/100TX Industrial Ethernet Switch w/16 PoE at/af up to 30W, dual 44~56VDC input; -40°C to 75°C
8351-1293	IPES-0016-14-48V-E	16 10/100TX Industrial Ethernet Switch w/14 PoE at/af up to 30W, dual 44~56VDC input; -40°C to 75°C

OPTIONAL ACCESSORIES - DIN Rail Power

Model name	Description
NDR-480 Series	480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series	240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series	120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series	75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)

Hardened Ethernet Connections

Hardened Routers

Indoor Rackmount / PoE / Fiber

Software / Accessories

Naming Rule