Lantech IGS-5008T (IP67/IP54) is a high performance EN50155 L2+ all Gigabit Ethernet switch with 8 10/100/1000T at M12 X-coded providing L2 wire speed and advanced security function for network aggregation deployment. It houses in an IP67/IP54 aluminum compact enclosure that is waterproof and will prevent moisture ingress due to temperature fluctuations. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+*, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* are supported and also required in large network. It also supports10K Jumbo frame.
Galvanic isolation for WV input; 12V input model
The IGS-5008T (IP67/IP54) provides galvanic isolation between DC input and system for WV model. (16.8V~137.5VDC dual input) The 12V model can accept dual power input from 9V~60VDC.
Enhanced G.8032 ring, 16 MSTI MSTP; Optional MRP ring
Lantech IGS-5008T (IP67/IP54) features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring, multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows RSTP over VLAN for redundant links with 16 MSTI.
Optional MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
Re-powered ring restoration, Miss-wiring alert, Loop protection
The IGS-5008T (IP67/IP54) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IGS-5008T (IP67/IP54) is able to alert with the LED indicator and disable ring automatically. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
QoS by VLAN for legacy device
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.
QinQ*, QoS QinQ* and GVRP* supported
It supports the QinQ*, QoS QinQ*, GVRP* for large VLAN segmentation.
IGMPv3, GMRP*, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP*, router port and static multicast forwarding binding by ports for video surveillance application.
DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server**
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.
User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes IGS-5008T (IP67/IP54) much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Editable configuration file; InstaView** for mass deployment
Optional N key auto backup, Exported text file
The configuration file of Lantech IGS-5008T (IP67/IP54) can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The optional N-key configurator offers firmware upgrade, auto backup/ editable configuration restore without computer by adjusting the DIP switch. The built-in watchdog design can automatically reboot the switch when CPU is found dead.
With optional InstaView, the configuration files can be mass backup, mass-editable deployed and auto upgrading firmware in batch make maintenance easy.
Event log & message; 4 DI + 3DO
In case of event, the IGS-5008T (IP67/IP54) is able to send an email & SMS** text message to pre-defined addresses as well as SNMP Traps out immediately. It provides 4DI and 3DO when disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.
Environmental monitoring for inside switch info
The built-in environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps, email and SMS** alert when abnormal.
Relay alarm, High ESD protection
Featured with relay contact alarm function, the IGS-5008T (IP67/IP54) is able to connect with alarm system in case of power failure or port disconnection events. The IGS-5008T (IP67/IP54) also provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet.
EN50155, 45545-2, 50121-3-2, 61373 verification*
The IGS-5008T (IP67/IP54) passed serious tests under extensive Industrial EMI and Safety standards. With EN45545-2 Fire & Smoke, and EN50155 verification, the IGS-5008T (IP67/IP54) is best for railway in train/track side, vehicle and mining applications. For more usage flexibilities, IGS-5008T (IP67/IP54) supports wide operating temperature from -40°C to 75°C.
Optional GigaT bypass
The optional bypass relay is set to bypass the switch to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost.
|8361-425||IGS-5008T-X-67-WV||8 10/100/1000T X-coded EN50155 IP67 L2+ Gigabit Managed Ethernet Switch; -40°C to 75°C; 16.8~137.5VDC dual input|
|8361-4252||IGS-5008T-X-54-WV||8 10/100/1000T X-coded EN50155 IP54 L2+ Gigabit Managed Ethernet Switch; -40°C to 75°C; 16.8~137.5VDC dual input|
|8361-427||IGS-5008T-X-67-12V||8 10/100/1000T X-coded EN50155 IP67 L2+ Gigabit Managed Ethernet Switch; -40°C to 75°C; 9V~60VDC dual input|
|8361-4272||IGS-5008T-X-54-12V||8 10/100/1000T X-coded EN50155 IP54 L2+ Gigabit Managed Ethernet Switch; -40°C to 75°C; 9V~60VDC dual input|
|8850-100||N-key Configurator||RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 60°|
|ECONM23-5P(F)70CM CABLE||M23 power cable 90 degree angle, 70cm, 5 pin, Made in Taiwan|
|ECONM23-5P(F)70CM CABLE-C||M23 power cable 90 degree angle, 70cm, 5 pin, Made in China|
|ECABM12X83MSTP||8 Pin M12 X-coded RJ45 Male 3 METER, STP CABLE w/ Shielding|