Lantech IGS-3208C is a high performance L2+ all Gigabit switch with 8 10/100/1000T + 2 x 10/100/1000T/Dual Speed 100/1000M SFP combo which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms for single ring, comprehensive QoS, VLAN, GVRP, advanced security SSH v2/SSL, INGRESS ACL L2/L3, IGMPv1/v2/v3/router port, DHCP server/relay, jumbo frame which are important features required in mid and large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and to be shown on L2 map topology.
Miss-wiring avoidance, Node failure protection, Loop protection
The IGS-3208C also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IGS-3208C is able to alert with the LED indicator and disable ring automatically. Node failure protection function ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes IGS-3208C much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Enhanced G.8032 ring, 8 MSTI MSTP
Lantech IGS-3208C features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 8 MSTI
DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Snooping is supported. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application.
It supports the GVRP for large VLAN segmentation.
802.1X security by MAC address
MAC-based port authentication is an alternative approach to 802.1x for authenticating hosts connected to a port. By authenticating based on the host's source MAC address, the host is not required to run a user for the 802.1x protocol. The RADIUS server that performs the authentication will inform the switch if this MAC can be registered in the MAC address table of switch.
IGMPv3, GMRP, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port and static multicast forwarding binding by ports for video surveillance application.
Editable configuration text file; Factory reset button; CPU watchdog
The configuration file of Lantech IGS-3208C can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. Factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead. IGS-3208C also supports dual image firmware function
USB port for back up, restore configuration and upgrade firmware
The built-in USB port can upload/download the firmware through USB dongle for switch replacement.
Event log & message; 2DI / 2DO
In case of event, the IGS-3208C is able to send email to pre-defined addresses as well as SNMP Traps out immediately. It provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.
Relay alarm and email/trap alerting
Featured with relay contact alarm function, the IGS-3208C is able to connect with alarm system in case of power failure and port disconnection. In case of such event, it will send out email, trap alerting to predefined users.
Optional environmental monitoring** for switch inside information (-M model)
The environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps and email alert when abnormal.
Dual 12V~48V input; High reliability and extended working temperature
Lantech IGS-3208C is designed with dual input power at 9.5V~60VDCinput; Lantech IGS-3208C provides ±2000V EFT/SURGE and ±4000 VDC (Contact) / ±8000 VDC (Air) Ethernet ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.
The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
|8351-011||IGS-3208C||8 10/100/1000T + 2 10/100/1000T/Dual Speed SFP combo L2+ Industrial Managed Ethernet Switch, dual 9.5V~60VDC input w/ isolation, -20°C to 60°C|
|8351-012||IGS-3208C-E||8 10/100/1000T + 2 10/100/1000T/Dual Speed SFP combo L2+ Industrial Managed Ethernet Switch, dual 9.5V~60VDC input w/ isolation, -40°C to 75°C|
|8351-0111||IGS-3208C-M||8 10/100/1000T + 2 10/100/1000T/Dual Speed SFP combo L2+ Industrial Managed Ethernet Switch, dual 9.5V~60VDC input w/ isolation, -20°C to 60°C; Environmental monitoring|
|8351-0112||IGS-3208C-M-E||8 10/100/1000T + 2 10/100/1000T/Dual Speed SFP combo L2+ Industrial Managed Ethernet Switch, dual 9.5V~60VDC input w/ isolation, -40°C to 75°C; Environmental monitoring|
|MDR-40 Series||40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)|
|MDR-20 Series||20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)|
|Model name||Description||Model name||Description|
|8330-162X||MINI GBIC 1000SX (LC/0.5KM) Transceiver||8330-186||1.25Gbps BiDi SFP 20KM Transceiver (WDM 1310)|
|8330-163X||MINI GBIC 1000SX2 (LC/2KM) Transceiver||8330-187||LTSFP-1000BX-20KM Transceiver (WDM 1550)|
|8330-165X||MINI GBIC 1000LX (LC/10KM) Transceiver||8330-180||LTSFP-1000BX-40KM Transceiver (WDM 1310)|
|8340-0591||MINI GBIC 1000LHX (LC/40KM) Transceiver||8330-182||LTSFP-1000BX-40KM Transceiver (WDM 1550)|
|8330-166||MINI GBIC 1000XD (LC/50KM) Transceiver||8330-181||LTSFP-1000BX-60KM Transceiver (WDM 1310)|
|8330-169||MINI GBIC 1000XD (LC/60KM) Transceiver||8330-183||LTSFP-1000BX-60KM Transceiver (WDM 1550)|
|8330-167||MINI GBIC 1000ZX (LC/80KM) Transceiver||8330-184||LTSFP-1000BX-80KM Transceiver (WDM 1490)|
|8330-170||MINI GBIC 1000EZX (120KM) Transceiver||8330-185||LTSFP-1000BX-80KM Transceiver (WDM 1550)|
|8330-168||MINI GBIC 10/100/1000T (100m) Transceiver||8330-071||125Mbps BiDi SFP 2KM (WDM 1310) Transceiver|
|8330-060||100Base FX 2KM, Multi-mode, LC Transceiver||8330-072||125Mbps BiDi SFP 2KM (WDM 1550) Transceiver|
|8330-065||100Base FX 5KM, Multi-mode, LC Transceiver||8330-069||125Mbps BiDi SFP 20KM (WDM 1310) Transceiver|
|8330-061||100Base LX 30KM, Single-mode, LC Transceiver||8330-068||125Mbps BiDi SFP 20KM (WDM 1550) Transceiver|
|8330-059||100Base LX 60KM, Single-mode, LC Transceiver||8330-080||125Mbps BiDi SFP 40KM (WDM 1310) Transceiver|
|8330-197||1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1310)||8330-082||125Mbps BiDi SFP 40KM (WDM 1550) Transceiver|
|8330-198||1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1550)||8330-081||125Mbps BiDi SFP 60KM (WDM 1310) Transceiver|
|8330-195||1.25Gbps BiDi SFP 2KM Transceiver (WDM 1310)||8330-083||125Mbps BiDi SFP 60KM (WDM 1550) Transceiver|
|8330-196||1.25Gbps BiDi SFP 2KM Transceiver (WDM 1550)||8330-084||125Mbps BiDi SFP 80KM (WDM 1310) Transceiver|
|8330-188||1.25Gbps BiDi SFP 10KM Transceiver (WDM 1310)||8330-085||125Mbps BiDi SFP 80KM (WDM 1550) Transceiver|
|8330-189||1.25Gbps BiDi SFP 10KM Transceiver (WDM 1550)||8330-191||Dual Speed SFP 100M/1000M-LX 10KM Transceiver|
|All SFP P/N# ended with D are with DDM function|