4 10/100TX + 1 100FX Industrial Unmanaged Switch

  • DNV Type Approved for Ships, Craft and Off-shore Platforms
  • Wide-range redundant power
  • Provides EFT & ESD protection
  • Wide operating temperature range from -40°C to 75°C



Datasheet   Manual

OVERVIEW

The Lantech IES-0104FT-DNV is a 4-port 10/100TX + 1-port 100FX Industrial Switch for plug-and-play installation. It can auto detect power inputs and supports wide input range from 9 to 56VDC/ -9 to -56VDC. To increase reliability, the IES-0104FT-DNV provides redundant power supplies.


The Lantech IES-0104FT-DNV is designed to meet the demands of industrial environments, comes packaged in a robust IP-30 housing and has been tested extensively to meet Industrial EMI and EMC standards. Rigorous mechanical testing has also been undertaken with free fall, shock, and vibration stability test, which ensure long term reliability in critical industrial environments. It can be used in extreme environments with an operating temperature range from -40°C to 75°C.


The Lantech IES-0104FT-DNV meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive) in which vibration, high voltage, compass safe distance, salt mist tests, humidity etc are conducted to ensure the switch sustaining the harsh on-board environments often founded in Ships, Crafts and Offshore platforms.


FEATURES

  • DNV Type Approved for Ships, Craft and Off-shore Platforms
  • RJ-45 port support Auto MDI/MDI-X Function
  • Store-and-Forward Switching Architecture
  • Back-plane (Switching Fabric): 1.0Gbps
  • 2K MAC address table
  • Supports Wide Operating Temperature (-40°C~75°C)
  • Provides EFT protection ±2000 VDC for power line
  • Supports ±6000 VDC Ethernet ESD protection
  • Provides broadcast storm protection
  • IP-30 Protection with DIN Rail and Wall Mount Design
  • Power Supply
    • Wide-range Redundant Power Design
    • Overload Current Re-settable Fuse Present

SPECIFICATIONS

Hardware Specifications

Standards

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX and 100Base-FX
Fast Ethernet
IEEE802.3x Flow Control and Back Pressure

Switch Architecture

Back-plane (Switching Fabric): 1.0Gbps
Packet size throughput : 64bytes~1522bytes

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port

Mac Address

2K MAC address table

Connectors

10/100TX: 4 x RJ-45 with auto MDI/MDI-X function
100M fiber: 1 x SC type connector for Single-mode or Multi-mode type fiber cable
[Multi-Mode] power budget: Min: 9dB , MAX: 19dB.
[Single-Mode] power budget: Min: 19dB , MAX: 26dB.

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable EIA/TIA-568 100-ohm (100m)

Optical Cable

Multi-mode: 50/125um~62.5/125um
Single-mode: 9/125um
Available distance: 2km (Multi-mode)
30km (Single-mode)
Wavelength: 1310nm (Multi-mode/Single-mode)

Protocol

CSMA/CD

LED

Per port:
Link/Activity (Green), Full duplex/Collision (Yellow)
Per unit:
Power 1 (Green), Power 2 (Green), Fault(Red)

Overload current protection

Present

Power Supply

24 VDC (9~56VDC), Redundant power with removable terminal block

Power Consumption

4.44 Watts

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Case Dimension

Metal case. IP-30, 30 (W) x 95 (D) x 140(H) mm

Weight

800 g

Installation

DIN Rail and Wall Mount Design

EMI & EMS

FCC Class A,
CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8,
CE EN61000-4-11,
CE EN61000-4-12,
CE EN61000-6-2,
CE EN61000-6-4

Safety

CE/EN60950-1

Stability Testing

IEC60068-2-32 (Free fall),
IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)

MTBF

380717 hrs

Warranty

5 years

*Optional

DIMENSION

ORDER INFORMATION

P/N Model name Description
8350-335DNV IES-0104FT-SC-MM-DNV 4 10/100TX + 1 100FX (SC, MM 2km) Industrial Switch, Wide Operating Temperature (-40°C~75°C) DNV type approval
*Redundant power without polarity reverse protect function
8350-336DNV IES-0104FT-SC-SM-DNV 4 10/100TX + 1 100FX (SC, SM 30km) Industrial Switch, Wide Operating Temperature (-40°C~75°C) DNV type approval
*Redundant power without polarity reverse protect function


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
MDR-40 Series 40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)
MDR-20 Series 20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)