8 10/100TX Industrial Unmanaged Switch

  • DNV Type Approved for Ships, Craft and Off-shore Platforms
  • Wide-range redundant power with polarity reverse protection
  • UL Class I Division II for Group A,B,C and D hazardous location
  • Wide operating temperature: -40°C to 75°C



Datasheet   Manual

OVERVIEW

The Lantech IES-0008T-DNV is a slim type 8-Port 10/100BaseTX Industrial Switch. To increase reliability, it provides redundant power design. It can auto detect power inputs and supports wide input range from 9.5V to 56VDC.


The IES-0008T-DNV is designed to meet the demands of industrial environments, comes packaged in a robust IP-30 housing and has been tested extensively to meet Industrial EMI and EMC standards. With UL Class I Division II approval, IES-0008T-DNV can be implemented in hazardous or explosive condition without accelerating the damage. Rigorous mechanical testing has also been undertaken with free fall, shock, and vibration stability test, which ensure long term reliability in critical industrial environments.


The IES-0008T-DNV is compact in size and easy to be installed with DIN rail and wall mount kits. IES-0008T-DNV is applicable in many kinds of industrial environments. UL Class I Division II certification also makes it a best choice in inflammable environment.


The IES-0008T-DNV meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive) in which vibration, high voltage, compass safe distance, salt mist tests, humidity etc are conducted to ensure the switch sustaining the harsh on-board environments often founded in Ships, Crafts and Offshore platforms.


FEATURES

  • DNV Type Approved for Ships, Craft and Off-shore Platforms
  • 8-port 10/100TX Slim Type industrial switch
  • Supports ingress packet filter and egress rate limit
  • Conforms to IEEE 802.3u 100Base-TX/100Base-FX
    • Flow control on full-duplex
    • Back pressure on half-duplex
  • RJ-45 ports support auto MDI/MDI-X Function
  • Store-and-forward switching architecture
  • Wide-range redundant power design
  • Relay alarm output for power failure events
  • DIN rail and wall mount design with IP-30 enclosure
  • UL Class I Division II for Group A,B,C and D hazardous location
  • Wide operating temp. (-40°C~ 75°C)

SPECIFICATIONS

Hardware Specifications

Standards

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back-pressure

Switch Architecture

Back-plane (Switching Fabric): 1.6Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port

Memory Buffer

448Kbits

Mac Address

2K MAC address table

Connectors

10/100TX: 8 x RJ-45 with auto MDI/MDI-X function

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable
EIA/TIA-568 100-ohm (100m)

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), Fault (Red)
Per port: Link/Active (Green), Full duplex/Collision (Yellow)

Overload current protection

Present

Power Supply

9.5~56VDC, Redundant power with polarity reverse protect function and removable terminal block

Power Consumption

4.71 Watts

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Case Dimension

Metal case. IP-30,
30mm (W) x 95mm (D) x 140mm (H)

EMI & EMS

FCC Class A,
CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8,
CE EN61000-6-2,
CE EN61000-6-4

Safety

UL, cUL, CE/EN60950-1
UL Class I Division II for Group A,B,C and D hazardous location

Stability Testing

IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

MTBF

388566 hrs

Warranty

5 years

*Optional

DIMENSION

ORDER INFORMATION

P/N Model name Description
8350-621DNV IES-0008T-DNV 8 10/100TX Industrial Switch, Wide Operating Temperature (-40°C~75°C); DNV Type Approval


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
MDR-40 Series 40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)
MDR-20 Series 20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)