- ABOUT LANTECH
- PRODUCTS
Hardened Ethernet Connections
- Introducing OS3/OS4 (L3/L3 Lite) switches
- EN50155 10G Uplinks Managed Ethernet Switches
- EN50155 2.5G Uplinks Managed Ethernet Switches
- EN50155 Giga Uplinks Managed Ethernet Switches
- EN50155 Unmanaged Ethernet Switches
- EN50155 IEC 61375 Ethernet Switches
- EN50155 Rackmount Ethernet Switches
- Vehicle Switches and Routers (E-Mark / ITxPT)
- Industrial IEC 61850-3 PT Switches
- Industrial Managed Switches
- Industrial 10G Switches
- Industrial 2.5G Switches
- Industrial Rackmount Switches
- Industrial PoE Solutions
- Industrial Unmanaged Switches
- Industrial Converter Series
Hardened Routers
Software / Accessories
Naming Rule
- SOLUTIONS
- LEARNING CENTER
- CASE STUDY
- SUPPORT
- NEWS / EVENTS
- CONTACT US
125Mbps~155Mbps, 1310nm, 100Base SFP Transceiver
- Distance: 2km, 5km, 30km, 60km
- Standard Operating Temperature: -10°C ~ 70°C
- Wide Operating Temperature: -40°C ~ 85°C
OVERVIEW
Lantech 100Base Small Form Factor Pluggable (SFP) transceiver module series is specifically designed for the high performance integrated duplex data link over single-mode or multi-mode optical fiber. These transceiver modules are compliant with the SFP Multisource Agreement (MSA). With the hot pluggability, these modules offer an easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.
Lantech 100Base SFP transceivers using a long wavelength (1310nm) enable data transmission up to 60km on a single-mode optical fiber or up to 5km on a multimode optical fiber.
FEATURES
- SFP Multi-Source Agreement compliant
- Serial ID functionality support
- AC-coupled differential inputs and outputs
- Class 1 laser safety standard IEC 60825 compliant
- Low power dissipation
SPECIFICATIONS
Absolute Maximum Ratings
Parameter |
Symbol |
Min. |
Max. |
Unit |
Note |
Storage Temperature |
Ts |
-40 |
+85 |
°C |
|
Supply Voltage |
VccT, VccR |
-0.5 |
4.0 |
V |
|
Storage Relative Humidity |
RH |
5 |
95 |
% |
|
Recommended Operating Conditions
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Case Operating Temperature |
Tc |
-10 |
|
70 |
°C |
|
Supply Voltage |
Vcc |
3.1 |
3.3 |
3.5 |
V |
|
Supply Current |
ITX + IRX |
|
150 |
300 |
mA |
Max. 250 for 5km model |
Receiver Electro-Optical Interface
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Receiver Differential Output Voltage |
RD +/- |
400 |
|
2000 |
mV |
Min. 300, Max. 1000 for 60km model |
|
Receiver Overload |
2km |
PINMAX |
-8 |
|
|
dBm |
1, 2 |
5km |
0 |
||||||
30km |
-5 |
||||||
60km |
-3 |
||||||
Receiver Sensitivity |
2km |
PINMIN |
|
|
-32 |
dBm |
1, 2 |
5km |
-30 |
||||||
30km |
-34 |
||||||
60km |
-34 |
||||||
Operating Center Wavelength |
λC |
1260 |
|
1620 |
nm |
Max. 1600 for 5km model |
|
Receiver Loss of Signal – TTL Low |
2km |
PRX_LOSD |
|
|
-32 |
dBm |
|
5km |
-30 |
||||||
30km |
-35 |
||||||
60km |
-34 |
||||||
Receiver Loss of Signal – |
PRX_LOSA |
-45 |
|
|
dBm |
Min. -46 for 60km model |
|
Receiver Loss of Signal - Hysteresis |
PRX_LOSH |
0.5 |
|
|
dB |
Min. 1.0 for 5km model |
|
Notes: 1. (For 2/5/30km models) With BER better than or equal to 1×10-12, measured in the center of the eye opening with 27 –1 PRBS Notes: 2. (For 60km model) Measured with a PRBS 223 –1 test pattern @155Mbps BER<10-10 |
|||||||
Transmitter Electro-Optical Interface
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Transmitter Differential Input Voltage |
TD +/- |
400 |
|
2400 |
mV |
Min. 300, Max. 1600 for 60km model |
|
Tx_Fault - High |
VFault_H |
2 |
|
Vcc |
V |
|
|
Tx_Fault - Low |
VFault_L |
Vee |
|
Vee+0.8 |
V |
|
|
Tx_Disable - High |
VDisable_H |
2 |
|
Vcc |
V |
|
|
Tx_Disable - Low |
VDisable_L |
Vee |
|
Vee+0.8 |
V |
|
|
Optical Output Power |
2km |
PO |
-20 |
|
-14 |
dBm |
1 |
5km |
-9 |
0 |
|||||
30km |
-15 |
-8 |
|
||||
60km |
-5 |
0 |
2 |
||||
Optical Extinction Ratio |
2km |
ER |
10 |
|
|
dB |
|
5km |
8.2 |
||||||
30km |
8.2 |
||||||
60km |
10 |
||||||
Center Wavelength |
2km |
λC |
1270 |
|
1380 |
nm |
|
5km |
1261 |
1360 |
|||||
30km |
1261 |
1360 |
|||||
60km |
1280 |
1310 |
1340 |
||||
Spectral Width |
2km |
Δλ |
|
|
7.7 |
nm |
|
5km |
7 |
||||||
30km |
4 |
||||||
60km |
2 |
||||||
Optical Rise / Fall Time |
2km |
tr / tf |
|
|
3.0 |
ns |
2, 3 |
5km |
2 |
||||||
30km |
2 |
||||||
60km |
2 |
||||||
Notes: 1. Coupling into a 62.5/125μm, NA=0.275 fiber. 2. The optical power is launched into a 9/125μm single-mode fiber 3. 10% to 90% value (2/5/30km models) 4. 20% to 80% value (60km model) |
|||||||
MTBF
|
60% Confidence Level, 25°C |
90% Confidence Level, 25°C |
||
MTBF |
FIT |
MTBF |
FIT |
|
2km |
1627052 |
615 |
650821 |
1537 |
5km |
1627052 |
615 |
650821 |
1537 |
30km |
1627052 |
615 |
650821 |
1537 |
60km |
813526 |
1229 |
325410 |
3073 |
DIMENSION
*All dimensions are ±0.2mm unless otherwise specified
ORDERING INFORMATION
Part Number |
Wavelength |
LD |
IO |
LOS |
Mode |
Link |
Temp. |
8330-060-V1 |
1310nm |
FP |
AC/AC |
TTL |
Multi-mode |
2km |
-10~70°C |
8330-065-V1 |
1310nm |
FP |
AC/AC |
TTL |
Multi-mode |
5km |
-10~70°C |
8330-061-V1 |
1310nm |
FP |
AC/AC |
TTL |
Single-mode |
30km |
-10~70°C |
8330-059-V1 |
1310nm |
FP |
AC/AC |
TTL |
Single-mode |
60km |
-10~70°C |
8330-060E-V1 |
1310nm |
FP |
AC/AC |
TTL |
Multi-mode |
2km |
-40~85°C |
8330-065E-V1 |
1310nm |
FP |
AC/AC |
TTL |
Multi-mode |
5km |
-40~85°C |
8330-061E-V1 |
1310nm |
FP |
AC/AC |
TTL |
Single-mode |
30km |
-40~85°C |
8330-059E-V1 |
1310nm |
FP |
AC/AC |
TTL |
Single-mode |
60km |
-40~85°C |
