- ABOUT LANTECH
- PRODUCTS
Hardened Ethernet Connections
- Introducing OS3/OS4 (L3/L3 Lite) switches
- EN50155 10G Uplinks Managed Ethernet Switches
- EN50155 2.5G Uplinks Managed Ethernet Switches
- EN50155 Giga Uplinks Managed Ethernet Switches
- EN50155 Unmanaged Ethernet Switches
- EN50155 IEC 61375 Ethernet Switches
- EN50155 Rackmount Ethernet Switches
- Vehicle Switches and Routers (E-Mark / ITxPT)
- Industrial IEC 61850-3 PT Switches
- Industrial Managed Switches
- Industrial 10G Switches
- Industrial 2.5G Switches
- Industrial Rackmount Switches
- Industrial PoE Solutions
- Industrial Unmanaged Switches
- Industrial Converter Series
Hardened Routers
Software / Accessories
Naming Rule
- SOLUTIONS
- LEARNING CENTER
- CASE STUDY
- SUPPORT
- NEWS / EVENTS
- CONTACT US
125Mbps, 850nm, 100Base SFP Transceiver
- Distance: 2km
- Standard Operating Temperature: -10°C ~ 70°C
- Wide Operating Temperature: -40°C ~ 85°C
OVERVIEW
Lantech 100Base Small Form Factor Pluggable (SFP) transceiver module series is specifically designed for the high performance integrated duplex data link over single-mode or multi-mode optical fiber. These transceiver modules are compliant with the SFP Multisource Agreement (MSA). With the hot pluggability, these modules offer an easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.
The high performance 850nm provides superior performance for Ethernet applications up to 2KM MMF optical links.
FEATURES
- Compliant with IEEE802.3u 100Base-FX Standard
- Compliant with SFP MSA
- Hot Pluggable
- 850nm VCSEL laser transmitter
- Duplex LC connector
- 2-wire interface for management
- Single +3.3V power supply voltage
- Transmission distance of 2KM over MM fiber
- RoHS Compliant
SPECIFICATIONS
Absolute Maximum Ratings
Parameter |
Symbol |
Min. |
Max. |
Unit |
Note |
Storage Temperature |
Ts |
-40 |
+85 |
°C |
|
Supply Voltage |
VccT, VccR |
-0.5 |
4.0 |
V |
|
Storage Relative Humidity |
RH |
5 |
95 |
% |
|
Recommended Operating Conditions
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Case Operating Temperature |
Tc |
-10 |
|
70 |
°C |
|
Supply Voltage |
Vcc |
3.15 |
3.3 |
3.45 |
V |
|
Supply Current |
Icc |
|
|
240 |
mA |
|
Receiver Electro-Optical Interface
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Differential Data Output Voltage |
Vout, pp |
500 |
|
1200 |
mV |
|
|
Maximum Input Power |
PINMAX |
-3 |
|
|
dBm |
1 |
|
Receiver Sensitivity |
PINMIN |
|
|
-26 |
dBm |
1 |
|
Operating Center Wavelength |
λC |
770 |
|
870 |
nm |
|
|
LOS De-Assert |
LOSD |
|
|
-26 |
dBm |
|
|
LOS Assert |
LOSA |
-37 |
|
|
dBm |
|
|
LOS Hysteresis |
LOSVHY |
0.5 |
|
|
dB |
|
|
Optical Rise / Fall Timet |
tr / tf |
|
|
2 |
ns |
2 |
|
Receiver LOS Signal Output Voltage-Low |
LOSVL |
GND |
|
GND+0.5 |
V |
|
|
Receiver LOS Signal Output Voltage-High |
LOSVH |
2.4 |
|
Vcc |
V |
|
|
Notes: 1. With BER better than or equal to 1×10-12, measured in the center of the eye opening with 27 –1 PRBS 2.20% to 80% value |
|||||||
Transmitter Electro-Optical Interface
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Differential Data Input Voltage |
VDIFF |
400 |
|
2000 |
mV |
|
|
Optical Launch Power |
PO |
-9 |
|
-3 |
dBm |
1 |
|
Optical Extinction Ratio |
ER |
9 |
|
|
dB |
|
|
Center Wavelength |
λC |
830 |
850 |
870 |
nm |
|
|
Spectral Width |
Δλ |
|
|
0.85 |
nm |
|
|
Optical Rise / Fall Timet |
tr / tf |
|
|
2 |
ns |
2 |
|
Optical Eye Mask |
|
IEEE802.3u |
|
||||
Transmit Disable Voltage |
VDIS |
2.0 |
|
Vcc |
V |
|
|
Transmit Enable Voltage |
VEN |
GND |
|
GDN+0.8 |
V |
|
|
Notes: 1. Coupling into a 62.5/125μm, NA=0.275 fiber. 2. 20% to 80% value |
|||||||
DIMENSION
*All dimensions are ±0.2mm unless otherwise specified
ORDERING INFORMATION
Part Number |
Wavelength |
Mode |
Link |
Temp. |
8330-073-V1 |
850nm |
Multi-mode |
2km |
-10~70°C |
8330-073E-V1 |
850nm |
Multi-mode |
2km |
-40~85°C |
