Lantech Communications Global Inc

	\| English \| 简体中文 \|

Product Literature

		Catalogs
		Certification
		Datasheet
		White Papers
		Case Study

Home > Products > Industrial Wireless Access Point > IWP-2000-68

	IWP-2000-68

Industrial 802.11 a/b/g IP68 Redundant Access Point w/MESH

Dual RF for concurrent 802.11a&b/g usage
High Power output up to 26dBm
Up to 9 operation modes including Mesh, Router, VLAN modes
IP68 housing with Surge Arrestor

Overview
Features
Specifications
Ordering Info
Dimenstions
Downloads

OVERVIEW

Lantech IWP-2000-68 is an IEEE802.11 a/b/g Dual Radio Outdoor Multi-Function Wireless Access Point with Power over Ethernet (PoE) supported. Protected by IP68 rated metal housing, the IWP-2000-68 is able to sustain in the harshest industrial environments.

The IWP-2000-68 is able to operate as multi-function wireless system that included MESH, Point-to-Point/ Point-to-Multipoint Bridge, Access Point, Wireless Client, and Repeater, which provides the flexibility in wireless network applications. The dual radio of IWP-2000-68 can be functioned dual band and maintain each radio up to 54Mbps data rate simultaneously on both directions.

Lantech IWP-2000-68 provides reliable and stable wireless network connection with security and SNMP management. It is one of the best wireless networking choices.

FEATURES

Dual Radio: Two Radio IEEE 802.11 a/b/g for backhaul and local access.

Multi operating modes support: MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , VLAN-AP, AP_WDS_BRG, AP4_WDS_BRG

Bandwidth limitation

Power over Ethernet design

Mac filtering / IP Filtering

QOS (WMM) Enhance performance and density

LLDP Link Layer Discovery Protocol

Multiple SSID

Supports WEP 64/128, WPA, WPA2 Authentication

Supports SNMP V1/V2c/V3

Supports STP/RSTP

IP68 housing for highest grade of anti-dust and water/salty mist proof

Hardware Specification
Interface	1* RJ‐45 (for POE input) 1* RJ‐45 (for POE power forwarding)
Flash	16M bytes
Memory	64 MB SDRAM
Physical Dimensions	284(L)mm 251 (W)mm 67 (H)mm
Weight	3000g
Environmental Temperature Range	Operating: -30°C to 80°C Storage: -40°Cto 80°C
Humidity (non-condensing)	5%~95% Typical
Data Rates	802.11 b: 1, 2, 5.5, 11Mbps 802.11g: 6,9,12,18,24,36,48,54 Mbps 802.11a: 6,9,12,18,24,36,48,54 Mbps
Standards	IEEE802.11 a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u, IEEE802.3af
Power Requirements	Active Ethernet (Power over Ethernet) 48 VDC/0.375A External Unit: Auto sensing 100/240 VAC; 50/60 Hz
Regulation Certifications	FCC/CE, IP68
RF Information
Output power (± 1.5dBm)	802.11a 24dBm@6Mps 22dBm@36Mps 21dBm@48Mps 20dBm@54Mps 802.11b 26dBm@11Mps 802.11g 26dBm@6~24Mps 25dBm@36Mps 24dBm@48Mps 23dBm@54Mps
Sensitivity (Typical)	802.11a -92dBm @ 6Mbps, -72dBm @ 54Mbps 802.11b -95dBm @ 1Mbps, -90dBm @ 11Mbps 802.11g -92dBm @ 6Mbps, -73dBm @ 54Mbps
Networking Information
Topology	Ad‐Hoc, Infrastructure
Operation Mode	MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , WDS (Repeater)
SSID	Multiple SSID
Interface	Two 10/100Mbps RJ‐45 LAN Port
Security	IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in AP Mode IEE802.1x Supplicant (TTLS, PEAP) support in Client Bridge Mode WPA-WiFi Protected Access WPA2 (802.11i) WEP 64,128 bits MAC address filtering Layer2 Isolation VLAN tunneling Support Hide SSID
LLDP	Link Layer Discovery Protocol
AP Scan	Rogue AP Scan
STP/RSTP	STP/RSTP
QOS	WMM
Mac Filter	Setting 15 Mac Address
Bandwidth limitation	Traffic shaping by IP for each client in Route mode only 30 list
Management Features
IP Auto‐configuration	DHCP client/ server
SNMP	V1/V2c/V3
NTP server	Support NTP client
Remote Configuration	•Web‐based configuration (HTTP) •Telnet
Firmware Upgrade	Upgrade firmware via WEB and TFTP/FTP
Max Client	32 users (simultaneously) per radio
Network Management	Lantech-View Pro

Warranty	5 years

ORDERING INFOMATION

IWP-2000-68…..…………....….….......P/N: 8810-888
Industrial 802.11 a/b/g IP68 Redundant Access Point w/MESH

OPTIONAL ACCESSORIES

DIN Rail Power

AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

DIMENSIONS (unit=mm)

DOWNLOADS

Description				Download

IWP-2000-68 Datasheet

IWP-2000-68 Manual
IWP-2000-68 Firmware

©2010, Lantech communications Global, Inc. All rights Reserved		\| Home \| Sitemap \| Privacy \| Terms of Use \| Contact Lantech \|