Lantech Communications Global Inc

	\| English \| 简体中文 \|

Product Literature

		Catalogs
		Certification
		Datasheet
		White Papers
		Case Study

Home > Products > Industrial Wireless Access Point > IWP-1000

	IWP-1000

Industrial 802.11 a/b/g Redundant Access Point

Dual Radio for 802.11a or 802.11b/g
Supports AP / Bridge / Repeater / AP-Client Mode
Supports X-Roaming < 100ms
IP30 housing for industrial environment
Provides 1 PoE P.D. port with 1KV isolation

Overview
Features
Specifications
Ordering Info
Dimenstions
Downloads

OVERVIEW

Lantech IWP-1000 is a reliable 802.11a/b/g WLAN with 2 ports LAN Access Point. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. Users are able to configure IWP-1000 by WEB interface via LAN port or WLAN interface. IWP-1000 provides dual Ethernet ports in switch mode, so that users can use Daisy Chain to reduce the usage of Ethernet switch ports.

With IEEE802.11a/b/g dual mode capability, IWP-1000 is able to operate with a maximum link speed of 54Mbps to maximize the capacity of communication channel. The security standards include WEP, WPA, WPA-PSK (TKIP, AES), WPA2, WPA2-PSK (TKIP, AES), 802.1X and Radius. These various kinds of security standards for WLAN are also configurable to ensure the security of data transmission.

Lantech IWP-1000 supports HTTPs protocol over LAN or WLAN to assure the data security when users make configuration remotely. IWP-1000 also support switch mode. Users are able to use the Daisy Chain to reduce usage of Ethernet switch port. The redundant DC power inputs help to guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails.

IPW-1000 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification.

FEATURES

High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed

Highly Security Capability: WEP/ WPA/ WPA-PSK (TKIP,AES)/ WPA2/ WPA2-PSK (TKIP,AES)/ 802.1X Authentication supported

Support X-Roaming < 100 ms

Support wireless load balance

Support AP/Bridge/Repeater/AP-Client Mode

Switch Mode Supported: Daisy Chain support to reduce usage of switch ports

Dual redundant Ethernet port support redundant mode (Recovery time < 10ms) Secured Management by HTTPs

Wireless connecting status monitoring

Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper

1KV isolation for PoE P.D. port

Rigid IP30 housing for industrial environment

DIN-Rail and Wall-mount enabled

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	2
PoE P.D. Port	Present at ETH2 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min
WLAN Interface
Operating Mode	AP/Bridge/Repeater/AP-Client
Antenna Connector	Reverse SMA
Radio Frequency Type	DSSS
Modulation	IEEE802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAM IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band	America / FCC: 2.412~2.462 GHz (11 channels) 5.15 to 5.825 GHz (13 channels) Europe CE / ETSI: 2.412~2.472 Ghz (13 channels) 5.15 to 5.724 GHz (19 channels)
Transmission Rate	IEEE802.11b: 1 / 2 / 5.5 / 11 Mbps IEEE802.11a/g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps
Transmit Power	IEEE802.11a/b/g: 20dBm max.
Receiver Sensitivity	-81dBm @ 11Mbps, PER< 8%; -64dBm @ 54Mbps, PER< 10%
Encryption Security	WEP: (64-bit ,128-bit key supported) WPA: WPA2 :802.11i(WEP and AES encryption) PSK (256-bit key pre-shared key supported) 802.1X and Radius supported TKIP encryption
Wireless Security	SSID broadcast disable
Protocol Support
Protocol	ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)
LED Indicators
Power indicator	PWR 1(2)(PoE) / Ready: Red On: Power is on and booting up. Green On: Power is on and functioning Normally.
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
WLAN LEDs	WLAN Link /ACT: Green: Link, Orange: Poor signal Green for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
Fault	Red: Ethernet link down or power down
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input power	Dual DC inputs. 12~48VDC on 6-pin terminal block
Power consumption (Typ.)	6 Watts
Overload current protection	Present
Reverse polarity protection	Present on terminal block
Physical Characteristic
Enclosure	IP-30
Dimension	54.1(W) x 106.1(D) x 145.4(H) mm
Weight	804g
Environmental
Storage Temperature	-40oC ~ 85oC (-40oF ~ 185oF)
Operating Temperature	-10oC ~ 55oC (14oF ~ 131oF)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Stability Testing	IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Safety	EN60950-1

Warranty	5 years

ORDERING INFOMATION

IWP-1000…..…………....….….......P/N: 8810-555
Industrial 802.11 a/b/g PoE Redundant Access Point
IWP-1000…..…………....….….......P/N: 8810-557
Industrial 802.11 a/b/g Redundant Access Point

OPTIONAL ACCESSORIES

DIN Rail Power

AD1048-24FS
24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
AD1024-24F
24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

DIMENSIONS (unit=mm)

DOWNLOADS

Description				Download

IWP-1000 Datasheet

IWP-1000 Manual
IWP-1000 Firmware

©2010, Lantech communications Global, Inc. All rights Reserved		\| Home \| Sitemap \| Privacy \| Terms of Use \| Contact Lantech \|