Lantech Communications Global Inc

	\| English \| 简体中文 \|

Product Literature

		Catalogs
		Certification
		Datasheet
		White Papers
		Case Study

Home > Products > Universal Redundant Fiber Controller > IFR-0202-ST

	IFR-0202-ST

Universal Redundant ST Fiber Controller

Redundant power inputs: 12~48VDC
Wall mount and DIN rail design
IP-30 Protection
Plug-and-play deployment

Overview
Features
Specifications
Ordering Info
Applications
Downloads

OVERVIEW

The Lantech IFR-0202 provides a permanent and trouble-free access port for in-line network devices. The 4x4 Optical Bypass Switch automatically switches network traffic through added in-line devices or bypasses devices that are about to be removed. Prevent link failure when attached in-line devices lose power by powering the IFR-0202 and in-line device from the same power source.

The Lantech IFR-0202 supports bypass function with fiber in-line device when it shares the same power source as the in-line device. While the IFR-0202 is receiving power, it diverts network traffic to attached in-line devices. In this state, all in-line traffic is routed directly to the device connected to the IFR-0202.

When the Optical Fiber Controller loses power, in-line traffic continues to flow through the network link, but is no longer routed through the device. This allows the network devices to be removed and replaced without network downtime. Once power is restored to the IFR-0202, network traffic is seamlessly diverted to the in-line device, allowing it to resume its critical functions.

FEATURES

Bypass function with fiber in-line device at speeds of 100 Mbps or 1000 Mbps

Increased reliability on critical network links

High-speed optical switching (<5ms) with minimal insertion loss (Max 1 6dB as Bypass Mode)

Fully RoHS compliant

IP 30 protection with DIN rail and wall mount design

LED indicator shows power status

Tested and compatible with all major manufacturers’ in-line devices

30 Seconds Boot Up Delay Design

Hardware Specification
Connector	ST Fiber Connectors
Optical Cable	Fiber Type: Multimode Corning 62.5/125μm, wavelength, 850nm Insertion Loss: Max 1.6dB when the switch losing power and is in Bypass mode Fiber Type: Singlemode Corning 9/125μm, wavelength, 1300~1550nm Insertion Loss: Max 1.6dB when the switch losing power and is in Bypass mode
Boot Up Delay	Every time the power has been connected, it'll take about 30 seconds delay then boot up.
Operation Wavelength	1280-1340/ 1520-1625 nm
Insertion Loss (dB) 1310/ 1550 nm	TX1→A0	0.62	0.51
	RX1→A1	0.55	0.43
	TX2→B0	0.35	0.35
	RX2→B1	0.81	0.66
	TX1→RX2	0.91	0.89
	RX1→TX2	0.99	0.86
Repeatability (peak to peak) 100 Cycles 1550 nm	ALL CH	Pass ≤ 0.1
Return Loss (dB) 1310/ 1550 nm	TX1→A0	50	53
	RX1→A1	52	53
	TX2→B0	52	53
	RX2→B1	50	54
	TX1→RX2	49	51
	RX1→TX2	54	52
PDL (dB) 1550 nm	ALL CH	Pass ≤ 0.1
WDL (dB) 1310/ 1550 nm	ALL CH	Pass ≤ 0.3
Switching Time (ms) 1550 nm	ALL CH	Pass ≤ 5
Cross Talk (dB) 1550 nm	ALL CH	Pass ≤ -80
LED	Power (Green)
Operating Humidity	5% ~ 95% (Non-condensing)
Operating Temperature	-20°C~60°C / -4°F~140°F
Storage Temperature	-40°C~85°C / -40°F~185°F
Power Supply	DC 12~48V, Redundant power and removable terminal block
Case	Metal case. IP-30 Protection
Dimension	50 (W) x 95 (D) x 140 (H) mm
Weight	440 g
Installation	DIN Rail and Wall Mount Design
Warranty	5 years

ORDERING INFOMATION

IFR-0202-ST-MM…………....….…........P/N: 8800-147
4x4 Industrial Optical Fiber Controller; ST connectors;
1.25Gbps/125Mbps Auto-Sensing; Multi mode

IFR-0202-ST-SM…………....….….........P/N: 8800-148
4x4 Industrial Optical Fiber Controller; ST connectors;
1.25Gbps/125Mbps Auto-Sensing; Single mode

OPTIONAL ACCESSORIES

DIN Rail Power

AD1048-24FS
24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
AD1024-24F
24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

APPLICATIONS

Lantech provides a complete Ethernet solution with IES-2307C, the managed industrial switch, and IFR-0202, the universal redundant fiber controllers. The wind turbines are connected with each other via optical fibers, providing the long distance transmission with stable quality. Several wind turbine towers are connected in a ring topology, where Lantech Pro-ring system provides the fastest redundant protection to prevent network interruption. Integrated with unique universal redundant fiber controllers, the fiber ring will be more reliable when facing multiple switches’ power off. As for maintenance, it will be able to maintain one switch and keep the connection active.

DOWNLOADS

Description				Download

IFR-0202 Datasheet

IFR-0202 Manual

©2010, Lantech communications Global, Inc. All rights Reserved		\| Home \| Sitemap \| Privacy \| Terms of Use \| Contact Lantech \|