Lantech Communications Global Inc

	\| English \| 简体中文 \|

Product Literature

		Catalogs
		Certification
		Datasheet
		White Papers
		Case Study

Home > Products > Industrial EN50155 Switches > IES-2008-67

	IES-2008-67

8 10/100TX M12 / IP-67 Managed Industrial Switch

Pro-Ring system covers X-Ring, Dual Homing, and Couple Ring Topology
Provides M12 connector with IP-66/67 rated protection
Wide Operating Temperature from -40°C to 75°C
Support with L-Key(M12) for easy maintenance

Overview
Features
Specifications
Ordering Info
Dimensions
Downloads

OVERVIEW

Lantech IES-2008-67 is an 8 10/100 Base-TX with M12-connctor Managed Industrial Switch for IP66/67 rated protection. The full SNMP management features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP. The PTP (Precision Time Protocol) client will be future supported.

Equipped with DC 9V~56V/DC -9V~-56V power input design, Lantech IES-2008-67 can support redundant power supply input to ensure power runtime. It also supports relay contact to connect with alarm system, which can immediately notify of power failure and/or port down events. In case of events, Lantech IES-2008-67 will immediately send an email to pre-defined addresses and send trap to stations.

Lantech IES-2008-67 supports X-Ring, fast network recovery scheme in less than 10ms for up to 250 switches in a ring. Couple Ring is able to ensure network recovery protection between X-Ring groups. Dual homing is to back up the X-Ring groups when connect to upper layer or the core switch.

IES-2008-67 is designed to meet with critical network environment with IP67 enclosure and M12 connectors for protection against water and dust ingress. It has passed harsh environmental testing to comply with Industrial EMI and Safety standards. Besides 1.2KVA Hi-Pot abnormal test, it also passed stability testing such as Free fall, Shock, and Vibration. For a greater flexibility in application the IES-2008-67 supports an extended operating temperature range from -40°C to 75°C.

Lantech L-Key (M12) can be used to quickly configure the IES-2008-67 on site without the need for an IP connection or notebook PC. Lantech IES-2008-67 is an ideal choice for critical industrial environments such as smelters, crusher plants, open cut mines etc.

FEATURES

8-port 10/100TX Managed Industrial Switch with M12 connectors and IP66/67 rated protection

Back-plane (Switching Fabric): 5.6Gbps

1Mbits Packet Buffer

IGMP with Snooping and Query mode for Multi Media Application

8K MAC address table

Redundant Power Design with wide DC 9V~56V / DC-9V~-56V input

IEEE 802.1d Spanning Tree & IEEE 802.1w RSTP

Port Based VLAN, 802.1Q Tag VLAN, GVRP

Pro-Ring

X-Ring, Dual Homing, Couple Ring Topology
Provide redundant backup feature and the recovery time below 10ms

Port Trunk with LACP

Supports IEEE 802.1ab LLDP

IEEE 802.1p Class of Service, per port 4 priority queues

Port base, Tag Base and Type of Service Priority

Supports Ingress Packet Filter and Egress Rate Limit

Supports Broadcast/Multicast Packet Filter Control

Port Mirror: Monitor traffic in switched networks

System Log Server/Client

Security

Port Security: MAC address entries/Filter
IP Security: IP address security management to prevent unauthorized intruder
Login Security: IEEE802.1X/RADIUS

SNMP Trap

Device cold start, Power status, Authentication failure, X-ring topology changed, Port Link up/Link down, port events

Relay Alarm Output System Events

IGMP with Query mode for Multi Media Application

TFTP Firmware Update and System Configure Restore/Backup

Hardware Specification
IEEE Standard	IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP IEEE802.3af Power over Ethernet IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree IEEE802.1p Class of Service IEEE802.1Q VLAN Tag IEEE802.1x User Authentication (Radius) IEEE802.1ab LLDP IEEE1588 PTP client*
Switch Architecture	Back-plane (Switching Fabric): 5.6Gbps
Transfer Rate	14,880pps for Ethernet port 148,800pps for Fast Ethernet port
Packet Buffer	1Mbits
MAC Address	8K MAC address table
Connector	10/100TX: 8 x M12 4-pole D-coded with auto MDI/MDI-X function RS-232 connector: 1 x M12 8-pole A-coded
Network Cable	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E, 6 cable EIA/TIA-568 100-ohm (100m)
Protocol	CSMA/CD
LED	Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red), R-Master (Green) Ethernet: Link/Activity (Green, Fiber: Link/Activity (Green)
Power Supply	DC 9V~56V/DC-9V~-56V, Redundant power with M12 5-pole A-coded connector
Reserve polarity protection	Present
Overload current protection	Present
Power Consumption	14W
Operating Temperature	-40°C~75°C / -40°F~167°F
Storage Temperature	-40°C~85°C / -40°F~185°F
Operating Humidity	5% ~ 95% (Non-condensing)
Case Dimension	IP-67, 193mm (W) x 176mm (H) x 62.5mm (D)
Weight	1630g
Installation	Wall mount design
EMI & EMS	FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-6-2, CE EN61000-6-4
Stability Testing	IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Safety	UL508, UL, CE/EN60950-1 UL Class I Division II for Group A,B,C and D hazardous location
Standard	EN50155**
MTBF	388,201 hours
Warranty	5 years
Software Specification
Management	SNMP v1 v2c, v3/ Web/Telnet/CLI
SNMP MIB	RFC 1215 Traps MIB, RFC 1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 EtherLike, RFC 1757 Rmon, RSTP MIB, Private MIB, PoE MIB,LLDP MIB
VLAN	Port Based VLAN IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.) GVRP (256 Groups)
Port Trunk with LACP	LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members
LLDP	Supports IEEE802.1ab LLDP, the advertising of the switch’s Identity and capabilities
Spanning Tree	Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree
Pro-ring	Supports X-Ring, Dual Homing, Couple Ring Topology. X-Ring provides redundant backup feature and the recovery time below 10ms for up to 250 switches in a ring.
Quality of Service	The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service
Class of Service	Supports IEEE802.1p class of service, per port provides 4 priority queues
Port Security	Supports 100 entries of MAC address for static MAC and another 100 for MAC filter
Port Mirror	Supports 3 mirroring types: "RX, TX and Both packet"
IGMP	Supports IGMP snooping v1,v2 256 multicast groups and IGMP query
IP Security	Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
Login Security	Supports IEEE802.1X Authentication/RADIUS
Flow Control	Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
System Log	Supports System log record and remote system log server
SMTP	Supports SMTP Server and 6 e-mail accounts for receiving event alert
SNTP	Supports SNTP to synchronize system clock in Internet
Bandwidth Control	Support ingress packet filter and egress packet limit The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100) Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100)
Relay Alarm	Provides one relay output for port breakdown, power fail and alarm Alarm Relay current carry ability: 1A @ DC24V
SNMP Trap	Up to 3 Trap stations Cold start, Port link up, Port link down, Authentication Failure, Private Trap for power status, Port Alarm configuration, Fault alarm, X-Ring topology change
DHCP	Provides DHCP Client/ DHCP Server/ IP Relay functions
DNS	Provides DNS client feature and support Primary and Secondary DNS server
Firmware Update	Supports TFTP firmware update, TFTP backup and restore.
Configuration upload and download	Supports binary format configuration file for system quick installation
Future Release *Pending

ORDERING INFOMATION

IES-2008-67…..…………....….….......P/N: 8360-490
8 10/100TX IP67 rated Managed Industrial Switch w/M12 connectors

OPTIONAL ACCESSORIES

DIN Rail Power

AD1048-24FS
24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
AD1024-24F
24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

M12 Connector / Cable

ECON120005MM
5 Pin M12 Power Male Connector
ECON120004FF
4 Pin M12 RJ45 Female Connector
ECON120003FF
3 Pin M12 Relay Female Connector
ECAB125030F0
5 Pin M12 Power Female 3M Cable
ECAB124030MJ
4 Pin M12 RJ45 Male 3M Cable
ECAB123030M0
3 Pin M12 Relay Male 3M Cable
ECAB124030MM
4 Pin M12 Male-Male 3M Cable

DIMENSIONS (unit=mm)

DOWNLOADS

Description				Download

IES-2008-67 Datasheet
IES-2008-67 Manual
IES-2008-67 Firmware

©2010, Lantech communications Global, Inc. All rights Reserved		\| Home \| Sitemap \| Privacy \| Terms of Use \| Contact Lantech \|