SPECIFICATIONS
Standards |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back Pressure |
Connector |
Fiber: Duplex ST/SC/MT-RJ/VF-45, Simplex SC(WDM single mode)
RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support
[Multi-Mode] power budget: Min: 9dB, MAX: 19dB.
[Single-Mode] power budget: Min: 19dB, MAX: 26dB. |
Switch architecture |
Store and Forward |
Fiber parameters |
Fiber Core: Multi-Mode (62.5/125um, 50/125um), Single-Mode (8/125um, 10/125um)
Wavelength: 1310nm(Multi-mode), 1310nm(Single-mode), 1550nm(WDM, TX), 1310nm(WDM, RX)
Fiber Dis.: Multi-Mode Fiber 2KM, Single-Mode Fiber (30 KM), WDM (Single-Mode)20KM |
Link Loss Forward |
TX=>Fiber: If TX port link down, then converter will forced fiber to link down.
Fiber =>TX: If Fiber port link down, the media converter will forced TX port to link down. |
Transparent packet |
64 to 1600 Bytes |
Power |
Chassis Cabinet: AC 100~240 V, 50/60 HZ, 90w*2
Stand-alone (external adapter): DC9V / 0.7A |
| Power consumption |
|
|
AC 90V |
DC 5V |
Unload |
|
Full Load
|
3.87A
|
|
Environment |
Operation Temp.: 0°C to 45°C (32°F to 113°F)
Operation Humidity: 10% to 90% (Non-condensing) |
LED |
Module: Power, TX (100Mbps, LK/Act, FDX/COL), Fiber(LK/Act, FDX/COL)
Chassis: Power Good (A,B), Fail (A,B) |
DIP Switch |
DIP Switch 1: UTP Auto-Nego / 100Mbps Full Duplex mode
DIP Switch 2: Fiber Full/Half Duplex
DIP Switch 3: LLF (Link Loss Forwarding) Disable/Enable
DIP Switch 4: Switch Converter / Pure converter mode |
Dimension |
Module: 119mm x 85mm x 26mm
Multi-Converter Chassis - 440mm x 266mm x 133 mm (3U, 19") |
Storage Temp. |
-40°C to 70°C |
EMI & Safety |
FCC Class A, CE & UL,cUL |
Warranty |
2 years |
|
