8 10/100/1000T PoE at/af Industrial Ethernet Unmanaged Switch ; 12V/48V input models

  • Support IEEE802.3at/af up to 30W per port
  • Dual 9V~56VDC input(12V model) compliant with ISO 7637-2
  • Dual 45~56V DC input (48V model)
  • Max PoE budget 240W at 48V, 120W at 24V, 80W at 12V input
  • Relay alarm output system events
  • E-marking certificate for vehicle application*



Datasheet   Manual

OVERVIEW

Lantech IPGS-0008B is a high performance all 8 10/100/1000T industrial switch with w/8 PoE 802.3af/at Injectors


Galvanic isolation for dual 48V, 12V input with max PoE budget
The IPGS-0008B supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, high power wireless AP etc.


The IPGS-0008B-12V accepts power input 9~56VDC with IEEE802.3at/af standard up to 30W per PoE port with maximum 120W@24V and 80W@12V output (at dual input). The 12V model is also compliant with ISO 7637-2 Pulse 5a which protects switch from being damaged by high voltage that could be found at vehicle cranky start.


48V model accept 45~56VDC power input and can feed 48V output for PoE feeding in vehicle at max 240W @48V input.


E-marking certificate*, High reliability and extended working temperature
Lantech IPGS-0008B provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.


The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.


The E-marking certificate makes it the most suitable PoE switch for bus, carriage, other vehicles application as well as for industrial areas where the power source is limited with 12V but has demand of IP surveillance or VoIP applications. (-12V model)


FEATURES

  • 8 10/100/1000T industrial Ethernet switch w/8 PoE 802.3af/at Injectors (Total 8 Ports Switch)
  • Embedded 8 PoE Injectors IEEE802.3af/at function to feed power up to 30W@54V per port for active operation
  • Dual 9V~56VDC power input for 12V model with ISO7637 compliance; PoE buget 80W at 12V input, 120W at 24V input
  • Dual 45V~56VDC power input for 48V model with PoE budget 240W
  • Back-plane (Switching Fabric): 16Gbps
  • 10KB Jumbo frame
  • Provides EFT protection ±2000 VDC for power line.
  • Supports ±6000 VDC Ethernet ESD protection
  • Galvanic isolation between power input and case ground; between Ethernet port and case ground
  • E-marking* certificate for vehicle application (-12V model)
  • Relay alarm output for power fail and alarm
  • IP30 metal housing with DIN rail and Wall-mount** design

SPECIFICATIONS

Hardware Specifications

Standards

IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE802.3at/af Power over Ethernet

Switch Architecture

Back-plane (Switching Fabric): 16Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet port

Mac Address

16K MAC address table

Jumbo frame

10KB

Connectors

10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function
Power & P-Fail connector: 1 x 6-pole terminal block

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)

LED

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red);
Ethernet port: Link/Activity (Green), Speed (Amber);
PoE : Active (Green)

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F(-E model)

Storage Temperature

-40°C~85°C / -40°F~185°F

Power Supply

45~56VDC(48V model); 9V~56VDC(12V model)

PoE Budget

240W for 45~56V input(48V model)
80W at 12V input; 120W at 24V input(12V model)

PoE pin assignment

RJ-45 port # 1~#8 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides up to 30W.
Positive (VCC+): RJ-45 pin 1,2
Negative (VCC-): RJ-45 pin 3,6

Power Consumption

5W

Galvanic Isolation

Between power input and case ground
Between Ethernet port and case ground

Case Dimension

Metal case. IP-30,
43 (W) x 105 (D) x 152 (H) mm

Weight

900 g

Installation

DIN Rail and Wall Mount** Design

Relay Alarm

Provides one relay output for power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V

EMI & EMS

FCC Class A,
CE EN55032 Class A, CE EN55024, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)

Vehicle certificate

E13 marking* (-12V model)

MTBF

NA

Warranty

5 years

*Future Release **Optional

DIMENSION

ORDER INFORMATION

P/N Model name Description
8351-100 IPGS-0008B-48V 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch; dual 45~56VDC input; -20°C to 60°C
8351-101 IPGS-0008B-48V-E 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch; dual 45~56VDC input; -40°C to 75°C
8351-102 IPGS-0008B-12V 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch; dual 9V~56VDC input; compliant with ISO7637-2; -20°C to 60°C
8351-103 IPGS-0008B-12V-E 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch; dual 9V~56VDC input; compliant with ISO7637-2; -40°C to 75°C


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
NDR-480 Series 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series 120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series 75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)