8 10/100TX Industrial Unmanaged Switch

  • UL Class I Division II for Group A,B,C and D hazardous location
  • Wide-range redundant power with polarity reverse protection
  • DNV Type Approved for Ships, Craft and Off-shore Platforms
  • Wide operating temperature: -40°C to 75°C (-E / DNV model)



Datasheet   Manual

OVERVIEW

The Lantech IES-0008T is a slim type 8-Port 10/100BaseTX Industrial Switch. To increase reliability, it provides redundant power design with polarity reverse protection. It can auto detect power inputs and supports wide input range from 9V to 56VDC.


The IES-0008T is designed to meet the demands of industrial environments, comes packaged in a robust IP-30 housing and has been tested extensively to meet Industrial EMI and EMC standards. With UL Class I Division II approval, IES-0008T can be implemented in hazardous or explosive condition without accelerating the damage. Rigorous mechanical testing has also been undertaken with free fall, shock, and vibration stability test, which ensure long term reliability in critical industrial environments.


IES-0008T is compact in size and easy to be installed with DIN rail and wall mount kits. IES-0008T is applicable in many kinds of industrial environments. UL Class I Division II certification also makes it a best choice in inflammable environment.


DNV-Type Approval IES-0008T-DNV model is also available. It meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive) in which vibration, high voltage, compass safe distance, salt mist tests, humidity etc are conducted to ensure the switch sustaining the harsh on-board environments often founded in Ships, Crafts and Offshore platforms.


FEATURES

  • 8-port 10/100TX Slim Type industrial switch
  • Supports ingress packet filter and egress rate limit
  • Conforms to IEEE 802.3u 100Base-TX/100Base-FX
    • Flow control on full-duplex
    • Back pressure on half-duplex
  • RJ-45 ports support auto MDI/MDI-X Function
  • Store-and-forward switching architecture
  • Wide-range redundant power design
  • Power polarity reverse protection
  • Relay alarm output for power failure events
  • DIN rail and wall mount design with IP-30 enclosure
  • UL Class I Division II for Group A,B,C and D hazardous location
  • DNV-Type Approval IES-0008T-DNV model is available
  • -E / DNV model supports wide operating temp. (-40°C~ 75°C)

SPECIFICATIONS

Hardware Specifications

Standards

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back-pressure

Switch Architecture

Back-plane (Switching Fabric): 1.6Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port

Memory Buffer

448Kbits

Mac Address

2K MAC address table

Connectors

10/100TX: 8 x RJ-45 with auto MDI/MDI-X function

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable
EIA/TIA-568 100-ohm (100m)

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), Fault (Red)
Per port: Link/Active (Green), Full duplex/Collision (Yellow)

Reserve polarity protection

Present

Overload current protection

Present

Power Supply

24VDC (9~56VDC),12~36VAC*, Redundant power with polarity reverse protect function and removable terminal block

Power Consumption

4.71 Watts

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F (-E / DNV model)

Storage Temperature

-40°C~85°C / -40°F~185°F

Case Dimension

Metal case. IP-30,
30mm (W) x 95mm (D) x 140mm (H)

EMI & EMS

FCC Class A, CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS),
CE EN61000-4-8, CE EN61000-4-11,
CE EN61000-4-12, CE EN61000-6-2,
CE EN61000-6-4

Safety

UL, cUL, CE/EN60950-1
UL Class I Division II for Group A,B,C and D hazardous location

Stability Testing

IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

MTBF

388566 hrs

Warranty

5 years

*Optional

DIMENSION

ORDER INFORMATION

P/N Model name Description
8350-620 IES-0008T 8 10/100TX Industrial Switch, Standard Operating Temperature (-20°C~60°C)
8350-621 IES-0008T-E 8 10/100TX Industrial Switch, Wide Operating Temperature (-40°C~75°C)
8350-620-AC IES-0008T-AC 8 10/100TX Industrial Switch, Standard Operating Temperature (-20°C~60°C); 12~36VAC
8350-621-AC IES-0008T-E-AC 8 10/100TX Industrial Switch, Wide Operating Temperature (-40°C~75°C); 12~36VAC
8350-621DNV IES-0008T-DNV 8 10/100TX Industrial Switch, Wide Operating Temperature (-40°C~75°C); DNV Type Approval
*Redundant power without polarity reverse protect function


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
MDR-40 Series 40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)
MDR-20 Series 20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)