Lantech POS-100 is the most comprehensive splitter compliant with IEEE 802.3af PoE standard in the market. It's well-cover output voltage 5V, 7.5V, 9V, 12V range can connect with 95% of market PDs (Power Device) including Wireless AP, Camera, VOIP phone etc. Lantech POS-100 also encloses Φ2.0 & Φ2.5 DC jack cables to suit with most PDs power diameter.
Lantech POS-100 splits data and power signal over same Ethernet UTP cable and transfer input 48V (PoE standard) to 4 kinds voltages to meet with each PD needs. The inside PoE chip can correspond to PoE impedance signal sent by PoE injector or PSE (Power Source) to handshake with PoE standard first and then to deliver 48V power to drive PD, in which it prevents the risk of burning down the PD.
Lantech POS-100's light-weight and wall-mount design can easily go with any PD's installation. Lantech POA-100A injector is the best kit for POS-100 for PoE solution.
FEATURES
5v, 7.5v, 9v, 12v output adjustable
Short circuit protection
Delivering power and data to equipment
For Wireless AP, Bluetooth AP, IP Camera, IP Telephones, remote power feeding application
IEEE802.3af compliance
Plug-and-Play
Light weight and compact size
Regulate output voltage by switch
Encloses Φ2.0 & Φ2.5 DC jack cables
Hardware Specification
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3af Power over Ethernet
Connector
Data and power in: 1 x RJ-45.Data pin 1,2,3,6
Power pin: 4,5(V+), 7,8(V-) and 1,2(V+), 3,6(V-)
Data out: 1 x RJ-45, Data pin 1,2,3,6
Power out jack: 5V, 7.5V, 9V, 12V (Adjustable)/ Maximum feeding current: 2.4A@5V
Power plug diameter
2 power cable with straight plug and a right angle plug
Plug dimension: 5.5 x Φ2.0mm, 5.5 x Φ2.5mm
